Any one familiar with the X monitor? Any other sugestions for gauges? I want to get a set before I do anything else but not sure what to get. Any input would help!!


Mikehttp://www.dieselplace.com/forum/smileys/smiley2.gif

I have the X Monitor in my Ford. I have to say it's very nice. The pillar mount doesn't come painted, so I took it down to the paintshop and took the pillar with it. They all just snap in and out. They custom matched the paint and I will have to say it looks awesome. As far as functionality goes I like it. Seems to be very acurate from what I can tell, however another person I spoke to said the EGT's readings were off. But I dunno about this guy. It's a very clean install, will take about 2hrs+ to install though. But hey, your working on your truck in a good way. http://www.dieselplace.com/forum/smileys/smiley2.gif Just make sure you have the boost line plugged in tight to the "computer" portion. I had to unscrew the box cover so I could put a quick tie on the rubber boost hose to hold it on. It kept blowing off at over 30lbs of boost.


You can also program alerts (Tranny,EGT,Boost) to start flashing when you exceed certain temps. This is really handy when you don't pay attention to sh*t like I do.


Only downside to the X Monitor is since it is LCD Display direct sunglight makes it hard to read sometimes. Only downfall I noticed though.


I got mine a year ago off eBay for about $350.00 brand new.


I give it a http://www.dieselplace.com/forum/smileys/smiley20.gif. Edited by: TomHill

Thanks Tom! Im looking around on the net to find a good price. Nothing on e bay right now. What mods are you running?


Mike

Right now I'm running a 3 Pos. Western Diesel Chip, Custom Propane with a Transgo Shift kit. I also have a Detroit Locker and a US Gear Cyclone Power Fan. I love that fan, it's great for cooling and the noise, real attention getter. http://www.dieselplace.com/forum/smileys/smiley2.gif


I am putting in a Suncoast converter and valvebody soon. This tranny has 75k on it and the power this old "dinosour" is putting to it is causing some damage.


Don't you guys worry though, this 7.3L has some surprises. I have another engine I just bought and we will see how much power they will take before they die.

You aint messin around! Sounds like a sweet rig Tom! When you going to convert?http://www.dieselplace.com/forum/smileys/smiley2.gif

Thanks Mike


No plans to convert, that for sure. http://www.dieselplace.com/forum/smileys/smiley4.gif


This truck has been great, especially considering all the abuse I have given it. http://www.dieselplace.com/forum/smileys/smiley3.gif


Planning any mods for yours?


Tom

Yeah, lots of plans, just doing my homework. Thats what brought me to this site. Trying to get some good input! Any advice?

Really depends on what you want to do with it. Towing, Racing, Sled Puller etc. There are so many things you can do. I can't speak for the Duramax's but I would suggest the following depending on how much you want to spend:


Aftermarket Intake
Aftermarket Exhaust
Gauges


Just depends on what you want to do really, but that is a start.


Then it's things like, Fuel Boxes, Transmission Upgrades, Propane, Nos, Injectors, Turbo. uhh I'll stop there. http://www.dieselplace.com/forum/smileys/smiley3.gif


But once you start, you get the disease; I think the medical term is "Dieselitis" if I'm not mistaken. http://www.dieselplace.com/forum/smileys/smiley4.gif I got bit and now I'm playing and paying.


TomEdited by: TomHill

I also have the X-Monitor and am very happy with it. Only using the Pyro and Boost. Bought direct from BD at a fair price. Clean install and easy to read. Like the idae of setting limits and having the alarm sound if you reach them.

Thanks wojo! You in vegas by chance? Saw that your in gaming. What did you pay for the monitor?

Actually in Reno. Vegas does nothing for me. To BIG. Work for the largest slot machine manufacturer.


I would have to look at the receipt but it is at home. I think it was around 350.00. I was going to buy the X-Monitor locally but did not like the attitude of the guy I was dealing with. I had heard the price was pretty much dictated to the vendors so you might not see much of a difference. The 3 level (trans, pyro,boost) is a little more. I chose the 2 level because of price and my truck already has a transmission temp gauge.

Yeah, I dont really like the local guys either.





Vegas doesnt do anything for me either! The only reason Im here is for the money. Trying to make my fortune and get outhttp://www.dieselplace.com/forum/smileys/smiley2.gif Is it easier to find Diesel gas up there? I have a heck of a time in vegas. I just moved from Utah and literally every station had diesel.http://www.dieselplace.com/forum/smileys/smiley5.gif

Actually it is every where. But I try and only buy from the guys that I know move a lot of fuel. Sierra Sids and Baldinis for me. Real close in price so what ever I am closer to is where I stop. So you live in LV. I get there once in a while for work and have a few friends that live there. They say once you get past one summer your fine with the heat. I say No way.http://www.dieselplace.com/forum/smileys/smiley16.gif

I'm with you WOJO, can't stand the heat. I just moved out here to Oklahoma City from Southern Utah. You thought the heat was bad, add humidity. I'm just glad I work in an air conditioned office! http://www.dieselplace.com/forum/smileys/smiley4.gif


Tom

Where in southern utah tom? I just moved back to vegas from St. george. That town is what got me into the whole diesel thing. Been hooked ever since!!!http://www.dieselplace.com/forum/smileys/smiley16.gif


As for the heat, I live for it! Im in the Air conditioning business. If it dont get hot then I cant buy my toys.http://www.dieselplace.com/forum/smileys/smiley19.gif

I lived in Parowan, worked in Cedar Cty though. I started to spend a lot of time down there in St. George before I left though. Use to go out to the old airport and race all the ricers. They all got a kick out out it to what my truck launch in 4wd and burnout one of the front tires.


I will agree, that town has a lot of turned up trucks. Mostly Dodges though, but they were fun. Those dodge boys didn't like a powerstroke rolling in there handing them there asses, but I can't say it didn't happen to me as well. http://www.dieselplace.com/forum/smileys/smiley4.gif


Got plans to go back and visit family at the end of Oct.


Tom

I also have the X monitor and it is great. Tint your side windows and you don't have to worry about glare.


Cheers


Bear

I have the X-Monitor and I think it is worth the price. Although it would be just as nice if it didn't cost $380.


I will compare the Hot Juice and Monitor with the X-monitor if/when it comes out. I plan to install a pyro in the driver side exhaust manifold to compare how accurate the X-Monitor is.

Tom,


Just read your reply. Yeah, it was fun at the old airport strip till they shut it down. I was probably one of those Dodge boys you were making fun of.http://www.dieselplace.com/forum/smileys/smiley2.gif Just sold it last week. I actually miss it. Been really happy with my dmax though. You know any Applegates in good ol parowan?

hdmax, your findings with the comparison between the 2 shoould be interesting. I am curious as to the accuracy of the X-Monitor. Although I have no reason to think it is not. Just curious. I have post turbo install so I would have to adjust a couple hundred degrees.

bybycop, you have a PM. http://www.dieselplace.com/forum/smileys/smiley2.gif


Tom

Just looked at the X-Monitor web site and it looks like they changed the display to a dot-LED and it looks great. Anyone have the new one out? I'm going to request a catalog





Me

Another digital gauge option is the Quadzilla Monster Moniter. I have one installed in my overhead console, and have been very happy with it. Certainly not knocking the X-monitor, just letting you know about another option. I think the digital gauges are much more sensitive and have a much quicker response time than analog, and they look cool, toohttp://www.dieselplace.com/forum/smileys/Cool.gif Here's a pic of mine http://www.dieselplace.com/forum/uploads/FDA_Mvc-005f.jpg
DinoMaxhttp://www.dieselplace.com/forum/smileys/Big Smile.gif http://www.dieselplace.com/forum/smileys/Big Smile.gif

Here is an Xmonitor in the overhead.


http://www.corpair.com/dmax/xmon_close.jpg

CntrlCalDmax, that X-Monitor in the overhead looks good. I have been kicking that idea around myself. Now I might have to think harder. Maybe a spring project. Did you cut your existing cover or buy a new one? Looks good, thanks for the pic.

WOJO1,


I first installed it in the original cover just to the back of the cover. I found out I could not see it during the day unless I moved my head over to the center and looked at it more straight on. THIS DIDN'T WORK! So I bought a new cover, built an angled mount assy and glued it to the back of the new cover. This works great. The most time was building bellcranks for the two pushrods to mechaincally press on the original switchs on the display unit. If I did it again, I would set the alarms for each display before final installation and forget the buttons. I never use them anyway. The photo is taken from the drivers seat. The glare in this shop is from the flash.


http://www.dieselplace.com/forum/uploads/6ZB_xmonitor.jpg


LeoEdited by: CntrlCalDmax

just so you know dealer cost on these is 303.... I catch everything and the guy had the price sheet just laying there..... if they react fast i might get one... would look better than gauges IMHO