Goalie990
05-11-2006, 10:01 PM
Where is a pressure line to hook the boost gauge up to?? I only see vacume lines.
|
rex 05-11-2006, 10:05 PM you have to tap the upper intake manifold edzzed 05-11-2006, 10:05 PM Where is a pressure line to hook the boost gauge up to?? I only see vacume lines. drill and tap. that's what i did. strictlydiesel86 05-11-2006, 10:22 PM yup, drill and tap the upper plenum. its really easy to do, only took like 30 mins for the whole install. Turbine Doc 05-11-2006, 10:46 PM Take the upper intake off 1st, before D&T, engine does'nt digest shavings well asnowsquall 05-11-2006, 11:05 PM Just got my 10/32 fitting and tap. May just use a VDO 15 psi gauge I have around here somewhere. Have some 1/8" teflon tubing that I may stick inside some rubber hose or nylon tubing to protect it. Goalie990 05-12-2006, 08:33 AM Where should i drill the hole? My gauge didnt come with the fitting.. where can i get one? chrisk1500 05-12-2006, 08:51 AM Pick up an oil pressure line kit from a local parts shop....worked for me.... | ||