Looking for a shop that carries them and will also install. Thx!

Their website should have a dealer locator. If you dont have any luck with that you could try a Draw-Tite Dealer. They Re-package the Prodigy as their Intella-Stop Controller. Thats actually what I run.

They are not hard to install depending on what truck you have. If its a Duramax you should be able to get a pre-made harness for your truck that just plugs into a box at the drivers kick panel, its only abouot 3 feet long. Mine took everybit of 10 minutes to install.

Looking for a shop that carries them and will also install. Thx!

I would think that most RV dealerships would have the Prodigy for sale and will install it for you for a fee.

You'll find the best price online and you can install it yourself in about 3 minutes, it's that simple!

You'll find the best price online and you can install it yourself in about 3 minutes, it's that simple!

I got mine from www.brakecontroller.com (http://www.brakecontroller.com) for ~$125 shipped to me including the plug-in harness. I'm with the others ... If you have a late model GM truck with the towing package, this is a plug-n-play addition and not worth paying someone else to do it. Took me 15 minutes ... which includes tucking and tying the harness, deciding the exact location of preferance, drinking a beer, and 3M double-side taping the carrier to the underside dash panel (didn't want any screw holes ... at least not yet). This is the simplest thing you can add to your truck. Seriously, don't pay someone else to do it if you're at the very least compatible with a screw driver. If you're sure the Prodigy is what you want, a dealer is just going to charge you more than what you can find it for. Whatever you decide, good luck and enjoy it! ... steps off soap box ...