Has anyone played with
D5053
Used to enable the TCM's ability to learn and adjust upshifts beyond what is specified by the preset values.
Only the following values may be entered into this table:
- Disable
- Enable

or
D5054
Used to enable the TCM's ability to learn and adjust full throttle downshifts (kickdown) beyond what is specified by the preset values.
Only the following values may be entered into this table:
- Disable
- Enable

Good info for those looking

http://forum.efilive.com/showthread.php?t=2437

Has anyone played with
D5053
Used to enable the TCM's ability to learn and adjust upshifts beyond what is specified by the preset values.
Only the following values may be entered into this table:
- Disable
- Enable

or
D5054
Used to enable the TCM's ability to learn and adjust full throttle downshifts (kickdown) beyond what is specified by the preset values.
Only the following values may be entered into this table:
- Disable
- Enable


I would do it but my TCM doesn't have those tables.

It should, what Cal Level is the file? D70, DF6 etc?

Cheers,
Ross

Mine doesn't have that either.

My Cal is 15169839 and I am running the latest version of EFI. Cal level is DF6

Same here, no D5053 or D5054

Cal- 15183960
Cal Level - U24

It should, what Cal Level is the file? D70, DF6 etc?

Cheers,
Ross

Cal level N25

What is the date of the cal file? Seems all very odd really!.

Cheers,
Ross

Here's a screen shot from a 2004 LLY from the tune repository. Look in General then Parameters.

Tony
I'm looking at the tcm file that you uploaded and I see both files. Our TCM should be the same but I'm going to download mine this morning to see.

Greg

Tony
Download my TCM this morning and its the same as yours. The 2 files you are looking for are in the General file under parameters.

Greg

I don't see the Adaptive parms either.
OS = 784
Cal = 778
Cal lvl = DF6, Ver = 7.03, date = April 13, 2006

Before the 4/13/06 update I could read the following TCM, afterwards it is not suppported.
OS = 854
Cal = 857
Cal lvl = M17, Ver = NA, Date = NA


I am hitting the track tomorrow and would like to disable the upshift side.

I resolved my issues by reinstalling the latest version and updates!!


I don't see the Adaptive parms either.
OS = 784
Cal = 778
Cal lvl = DF6, Ver = 7.03, date = April 13, 2006

Before the 4/13/06 update I could read the following TCM, afterwards it is not suppported.
OS = 854
Cal = 857
Cal lvl = M17, Ver = NA, Date = NA


I am hitting the track tomorrow and would like to disable the upshift side.

Same here, problem resolved by reinstalling the latest version and updates!!

Original pre-release download was v732_406_533_451 Orignally available on April 22.

Just downloaded pre-release was v732_411_535_454 Dated April 25 on EFILive download page.

Check the Help->About for your currently installed version.

That was the problem. thanks!