I was wondering who is running a sureset automatic leveling on-board compressor system on their Duramax? I have an 06' Crewcab Long Bed and was wondering where did you guys mount the compressor and the manifold at? I don't see any room on the inside frame rail on the driver's side cause of all the fuel lines running down it. Then if you go to the passenger side the exhaust would be semi close to the compressor and manifold. Other question is how did you bring the cable inside the cable? I didn't see any visible grommets in the firewall to run it inside. So do you have a drill a hole in the firewall or can I come through an existing opening? If you guys have any pictures or can help me out, it would be greatly appreciated. Thank you fellow diesel members.

:grd:

drivers side inner rail ahead of the fuel tank there is plenty of room. theres a big grommet under drivers side (under feet) that the e- brake cable travels through, ive crammed quite a bit through it. then run under carpet up behind driver kick panel to under dash. put main fused comppresor wire on big stud inside that red plastic box under power steering pump, just get a big crimp ring.