Whats the easiest way to get that adhesive crap off from taking the moldings off. I tried hair dryer goo gone etc. big ole pain in the rear. Seems like it will take all day with that method.

Try a clay bar. You won't believe what those things can take off. Its going to take time no matter what method you use though

I used Acetone and it works well.

get an eraser wheel and put it on a drill. works awesome!!! can get one at an auto parts store.

I used WD-40

earaser wheel, we use them in the detail shop all the time at the dealer here.

Mine came right off u just used my thumb and a little pressure and it rolled of now my thnmb hurts though probably took me 20 mins tops!

which auto parts stores?

Tried Autozone and Checker they don't got it?

Carquest? Advance? Napa? only others I think around here.

Where I work we have some stuff from 3M that is adhesive remover and it works great.

Phillip
03DA
I LUV my truck

Try Carquest, I think they carry 3M.

Whats the easiest way to get that adhesive crap off from taking the moldings off. I tried hair dryer goo gone etc. big ole pain in the rear. Seems like it will take all day with that method.

Lighter fluid.

I used Reducer, some skin off my thumb and my nail to get the gunk off.. It is on there good!

Carquest sells the eraser wheel? Just need to know which store sells them

Usually the biggest carquest store in your town. I called the one closest to my house and they didn't have it, I had to go to the main one in town. It was an off brand eraser wheel but worked great!

:ro)

You can get the 3M adhesive remove at most hardware stores. It is heavy duty stuff that works well when removing the adhesive used to attach sound pading or interior carpeting. It does not usually harm the paint.