583524
04-06-2006, 12:34 PM
Sold my truck and was wondering how hard it is to take the edge/***/juice off by myself. Shop says 1 1/2 hours:confused: :confused:
|
Unit453 04-06-2006, 01:07 PM 1 to 1/2 hours? What a crock os XXXX. More like 3 minutes. touchracing 04-06-2006, 01:14 PM 1 to 1/2 hours? What a crock os XXXX. More like 3 minutes. :exactly: For a trip to the $teeler I can pull out my J/A and swap my afe 2 for stock in about 30 min. bogger 04-06-2006, 06:26 PM I think I did mine in the cold last night in about 5 mins and that included tearing the dash apart. RickDLance 04-06-2006, 08:14 PM Where is the Attitude mounted? 583524 04-06-2006, 09:04 PM On the window brace? See pics in my garage....I looked at the wiring and looks confusing..do you just unplug it and hook factory stuff back in??? RickDLance 04-06-2006, 09:13 PM Very simple. YOU CAN DO IT! :) The wires all simply plug in. Chances are the pillar piece is a simple overlay. Plugs under the hood are very simple. Just unplug all of them, remove the Edge, and plug whats left over back in. LTChip 04-06-2006, 10:25 PM Mine was mounted with the provided mount on the dash and the Attitude wires went through the door and into the engine compartment. Could take it off and return the harness plugs to stock in about 2 mikes TOPS!~ The plugs cant be plugged in wrong. Just be careful and try to push them in as far as they will go before pulling on the little levers that will seat them the rest of the way. 4x4man 04-07-2006, 01:41 PM Also, don't forget to sqeeze the lock tabs on either side of the connectors before trying to swing the bail connector to unhook the harness. I don't have a close up pic, but someone else might if you need it... Very simple to do, as others have said you can do it....AND don't pay the $tealer to do this!! | ||