I installed my tnr factory xm and my 6 disc changer today.everything works awesome,except when the cd's are playing it seems like the passenger speakers do not have the same sound as the driver side.Balance and fade are set with everything equal.When the radio is playing all sounds well,wondering if I crossed a wire on the changer:confused: I double checked and It looks like everything is wired right

I ran into the same problem also when playing cd's in the cdx I get feedback. I triple checked the wiring and no solution so I'm going to try a different cdx to see if it fixes the problem.

I just got through talking to machomachodan it is something on the 12 pin connector I have to double check my wiring tommorow,on the 12pin connector there is a-f
and then g-m,but no I terminal so I think I counted wrong
Ill find out tommorow

Check the wiring. The RIGHT audio wire is most likely not making a connection.

Where did you get your six cd harness at? some were wired wrong from the get go.

Are you getting un ballanced sound from the right side , like it is not as clear

All set looked at the schematic for the 12 pin connector,and I had it wired wrong there is no I terminal in that connector