|
: Hella Switch in Attitude Mount - Installation?? bccsrc 03-29-2006, 07:13 PM How do I wire the Hella Switch that comes in my Trippin Attitude Mount? I have 3 options, 1, 2, and 3? Which number is negative and which is positive and what is the third for? Thanks for your help!!! Max Power 03-29-2006, 07:20 PM One is +12v another is the load and the third is ground to turn the LED on when the switch is on. I THINK 1 is +12v 2 is load 3 is ground But I might be wrong it's been over a year since I have looked at mine. bccsrc 03-29-2006, 07:26 PM One more question.... What the heck holds the Trippin Attitude mount in place? I'm all :eek: confused.... jwfab1 03-29-2006, 07:29 PM It is machined to fit. It just pushes in, and it's tight. bccsrc 03-29-2006, 07:36 PM It is machined to fit. It just pushes in, and it's tight. Mine doesn't. Fits nicely in the overhead console but don't stay.... Max Power 03-29-2006, 07:39 PM I made 2 little L brackets held in and tightened down by a shortened 1/4 bolt utilizing the existing holes. It doesn't have to be fancy. I wish I had pics. bccsrc 03-29-2006, 08:22 PM I made 2 little L brackets held in and tightened down by a shortened 1/4 bolt utilizing the existing holes. It doesn't have to be fancy. I wish I had pics. I used an L bracket on the one side and a big washer on the side with the Switches. I guess that will work. Stays in place now. Thanks for the help!!! :cool2: | ||