I did a search and couldn't come up with the answer I was looking for. I am installing a boost and pyro gauge this weekend. Just to make sure you tap the turbo pipe on the passenger side for the boost correct? Could I get some pics please. I was thinking about tapping it underneath kinda hidden from the stealer. And for the power for the gauge lighting it is my understanding that I can tap into the brown/white wire on the headlight switch and get the dimming function with my dash lights.

go to

www.kennedydiesel.com

He is a supporting vendor and has a nice "how to" section.

If you drill in the Kennedy position make sure that you use a 90 degree angle drill. That way you won't have to pull the manifold off to drill and tap. A Super Diesel manifold is a good investment if you don't want to drill for the boost gauge.

The brown and white wire is the correct one to tap for the dimmer function.

I just drilled and tapped the top. Easier to get to and I never really considered a boost guage an issue with the dealership. Atleast I have never heard of an issue.

thats where my boost is taped. dealer shouldnt say much. My pyro probe was taped in the passenger side manifold. good luck.

You could always visit superdiesel's site and order a manifold. It's pretty cool and you don't have to drill anything except the Pyro probe.

yea he could do that,but if he's not going to add water/meth injection or nos he probable sould just tap the manifold. the sd manifold cost $125

tapped it couln't see that $125 nice product not economical for me