|
hdd-max 02-19-2006, 10:55 AM I have a ppe hot +2 and the thing shifts like crap at partial throttle. I did a search on the subject and seen where others had the same problem but did not see if anyone had found a fix. It shifts so bad that I will not run it anymore unless I find a fix for it. I did run it for about a week or so. I put the jk va200++ back on and it shifted perfect from the moment I put it back on. Let me know if you guys know of a fix. GMC-2002-Dmax 02-19-2006, 03:29 PM If the transmission won't learn you could get a TECH II and reset the TAPS. If the VA shifts fine then I would suspect it is the way the programmer is altering things that is the problem. Good Luck, T;) NY C.A.P 02-19-2006, 06:40 PM As of last week there is a new version that will be out , I HAVE BEEN TESTING IT AND IT IS FACTORY SMOOTH AT LOW SPEEDS. IT HAS ROCK SOLID SHIFTS AT WOT TOO. , DEFINATELY CALL PPE AND ADDRESS THIS AS THE NEW VERSION IS NIGHT AND DAY WITH SHIFTING.ASK FOR THE REVISED SHIFTING UNIT Hired Gun 02-21-2006, 09:36 AM Will it stack with the edge? Buzz 02-21-2006, 02:20 PM Looks like it's time to give them a call:ro) . I ran 3000 miles with the hot et version and it never got better. | ||