hardcoremxer7
02-11-2006, 07:41 PM
I was in the middle of the install and i can't get my 18mm valve broke loose. How in the world did u guys get urs broken loose? Thanks.
|
Max Power 02-11-2006, 08:01 PM I used a 2nd wrench for leverage. I had almost 2 feet of leverage. jmg343 02-12-2006, 11:45 AM I couldnt get mine even with 2 wrenches. I got a small craftsman impact gun with a 18mm flexhead socket on it and hammered away. After about ten minutes (litteraly) she broke loose. Cake walk from there. demp223 02-12-2006, 11:33 PM whats this shim mod? Kat 02-12-2006, 11:35 PM whats this shim mod? http://www.dieselplace.com/forum/showthread.php?t=37711&highlight=shim+mod demp223 02-12-2006, 11:57 PM Cool.Well no 1093 problems for me but if I ever should I will know what to do.This site is great.Already did my egr block plate on my fe9 truck.Turbo starts spooling up appx 200 rpms sooner. Max Power 02-12-2006, 11:59 PM I know on my truck I only had 1093 problems with the real high hp tunes. bas4241 02-13-2006, 12:03 AM Cool.Well no 1093 problems for me but if I ever should I will know what to do.This site is great.Already did my egr block plate on my fe9 truck.Turbo starts spooling up appx 200 rpms sooner. I would advise you to do it.....I was getting 1093's even with the Edge on level 3. All trucks vary! ;) demp223 02-13-2006, 12:22 AM Im not running a tuner.Only thing I have done is egr mod.Will eventually add a cat back 4 in exhaust to lower egt but thats it. jmg343 02-13-2006, 02:23 AM then you most likely will not have to worry about 1093s dmax500hp 02-13-2006, 09:58 AM I used a pipe 2 ft long pipe, 2 wrenchs and 250lbs pulling on it with no luck! Anyone else have any brilliant ideas on how to get the bastard out? Wasted Income 02-15-2006, 11:28 PM I used a pipe 2 ft long pipe, 2 wrenchs and 250lbs pulling on it with no luck! Anyone else have any brilliant ideas on how to get the bastard out?:exactly: Censored:help::help::help::thumbsdow 05LLY2500HD 04-08-2006, 12:58 PM uncle got it out first time and tigethend it back, now he can't even get it off.(need to shim it more) What a PITA!!!!!!! McRat 04-08-2006, 01:10 PM It was tightened by the Hand of God himself. Odd that UAW didn't file a grievance for GM hiring non-union help... Certain impact wrenches (short) will fit in, and a Snap-On brand 18mm wrench has been successful. I stripped the hex off one, so be careful. That is why I do not do it on other people's trucks. | ||