I was looking for a new turbo...

What a dummy.... they're closed on saturday's. :mad:

Did you have something particular in mind?

Anything i can make fit to make boost more efficiently than a GM-8.

DSG in swift current? You must have been bored or desperate... i would stay away from them the are expensive and Fk up most of what they do. No one i know will take anything to or buy anything from any of the DSG group (swift, regina, and saskatoon). Most ppl will either go to taber or to Havre montana for anything. If you are still in Maple Creek its only 1.5 hours to havre.
I have a turbo off of a 350 big cam cummins if that interests you. I'm in Leader, Sk. by the way.

You want boost, let me know and i will get you boost. Just say please;) !!!!!

Rig watcher, i know nothing about that turbo, will it fit?

Chicago... Please...

what ya got planned for your gm-8 after removed? Im in the market for a gm-8 in good condition..


Vince

Rig watcher, i know nothing about that turbo, will it fit?

Chicago... Please...

Yall need to skip the GM and go right to Holset, an HX35 or even a WH1C will work great.

I would not recommend that until after 18:1 and IC or some other after cooling, 10psi is plenty for most rigs out there GM-8 will give that easily, and also you need reflash or chip, otherwise it's just hot air.

CTDP got pics for the Holset install, might be a good FYI how to; post

CR I figured out from your avitar why yours ain't running good you got smoke coming out the wrong side of the truck ):h

what ya got planned for your gm-8 after removed? Im in the market for a gm-8 in good condition..

Sell it cheap.... good for 25 psi!

CR I figured out from your avitar why yours ain't running good you got smoke coming out the wrong side of the truck ):h

Here's one for you TD.

Why aren't you putting on twin turbos? Looks like you could squeeze them in there. Be more efficent than one. No cross over pipe. Less lag. More aggrivation. Looks cool. Different. Just what the "Rigger's Rig" needs.

http://www.oliverdiesel.com/friends/bierman.htm

Sell it cheap.... good for 25 psi!

NOT EFFICIENT BOOST!!!!!!!!!!!

Why aren't you putting on twin turbos? Looks like you could squeeze them in there. Be more efficent than one. No cross over pipe. Less lag. More aggrivation. Looks cool. Different. Just what the "Rigger's Rig" needs.

http://www.oliverdiesel.com/friends/bierman.htm

That thought has floated through my head a bazzillion times now, i just don't have the time or equipment to do that kinda fab work.

NOT EFFICIENT BOOST!!!!!!!!!!!

Not efficient as a Holset no... works well for what it was desinged for though.

Wheres that Turbo from you anyways... i said please in the other thread?

dp that looks like a project that requires real deeeep!! pockets lol
but really looks cool and i bet it really flies too !!

Why aren't you putting on twin turbos? Looks like you could squeeze them in there. Be more efficent than one. No cross over pipe. Less lag. More aggrivation. Looks cool. Different. Just what the "Rigger's Rig" needs.

http://www.oliverdiesel.com/friends/bierman.htm

THat is one sweet rig, makes me think . . . . . HM, 2 Holset HX35's :ro)

Only need to fabricate drivers side manifold. Have seen manifolds flipped. You can weld on extensions to existing manifold. I wonder what manifolds were used in the dual setup? The 6.5 would need some careful fitting to clear the steering column. Turbos with wastegates would be nice. Hooking up the intercooler would be a pain. Two turbos would create less heat in the charge air. You would need another down pipe fabrication. Don't forget a replacement engine when the bottom end blows out.
Hmmmm? That new 360hp. DurrMax looks like a better deal.

Here's one for you TD.

GE90 123" diameter fan good for about 130,000# thrust, Boeing 777 engine

bit thirsty though about 42 gpm

so where does one go in havuer for his turbo needs, down there lots


DSG in swift current? You must have been bored or desperate... i would stay away from them the are expensive and Fk up most of what they do. No one i know will take anything to or buy anything from any of the DSG group (swift, regina, and saskatoon). Most ppl will either go to taber or to Havre montana for anything. If you are still in Maple Creek its only 1.5 hours to havre.
I have a turbo off of a 350 big cam cummins if that interests you. I'm in Leader, Sk. by the way.

DSG in swift current? You must have been bored or desperate... i would stay away from them the are expensive and Fk up most of what they do. No one i know will take anything to or buy anything from any of the DSG group (swift, regina, and saskatoon). Most ppl will either go to taber or to Havre montana for anything. If you are still in Maple Creek its only 1.5 hours to havre.
I have a turbo off of a 350 big cam cummins if that interests you. I'm in Leader, Sk. by the way.

Leader you say, if i'd known that when i went to Swift i would have went there to look at this turbo instead. When's a good time and how much you asking for it? I haven't had a problem with DSG equipment on my rig...