My son wants to put a set of these on his pickup. It's a HD 3/4 ton, 8 on 6.5" bolt circle. Anyone done this yet? Got pics? Any problem areas with fit? If I don't hear anything here, we'll try it out this spring and I'll post it here.


CWB

Only thing I can think of is the hub diameter. Don't the older trucks have the larger size hubs?

Bolt circle is the same.

Seen them on the 3/4 ton 88-00 body style

Only thing I can think of is the hub diameter. Don't the older trucks have the larger size hubs?

Bolt circle is the same.

Thanks for the tip. I'll measure it.


CWB

IIRC the 88-00 have the same hub size as the new trucks but pre 88 has the larger hub like the dodge still uses.

Get someone w/ a CNC mill and have the open up the center hole.

I've even heard of people using a hole saw to open the hole up.

I put some on My jeepster, his truck should have a d44 or 10 bolt up front, I know the hubs are too big for the wheel, you have to machine the centers of the wheel out, the only good way to do so is with a rotary table and overhead mill or a big lathe. It cost me about 120.00 to have the set done at a local machine shop here, but the wheels were free so I didn't care

Okay, that's what we needed to know. He wants to use them so I'll be looking into the process of opening up the center. And if nothing else, I can always sell them to a wider user base... Thanks for the info.


CWB