I'm starting a new thread will be linked to FAQ please add to it a place to list part numbers for 6.2 & 6.5 Diesels list as much info as you can about the particular part

knkreb edit: See this thread (http://dieselplace.com/forum/showthread.php?t=228351)for the excel spreadsheet of this entire thread.

To start

p/n 710105 Federeral Mogul or Timken rear axle seal fits 98 K1500 @ Auto Zone or O Reileys

p/n 25117340 lift pump 98 K1500 GM dealer part #

p/n BF 1201 (Baldwin) 33376 (WIX) 5 micron fuel filter for fuel filter manager

p/n 10463940 GM alternator 98 K1500

p/n 1997255 WG solenoid GM 98 K1500

p/n 25098706 CDR GM 98 K1500

p/n 12559095 o ring, 12559583 oring, 12559584 o ring GM set for 4x4 oil filter adapter 98 K1500

p/n 1997227 WG solenoid (with foam filter) 94 - List @ 47.45 Local Discount @$40.33

Here is my contribution. All of the following pertain to 1997 K2500 6.5 TD. Should interchange give or take a few years. Also, these are genuine GM part #'s.

Lift pump- 15754298

Oil pressure Sending Unit- 12555492

Boost Sensor- 12569241

Glow Plug relay- 12496472

Wastegate Solenoid- 1997255

IAT sensor- 25037334

4x4 actuator- 26060076

4x4 actuator harness- 12376317

Harmonic Balancer- 10154688

Balancer belt pulley(crank pulley)- 12557345


TD, keep this thread open another day or two...I have many more to come.

This one won't close I'm hoping as folks find them they will add to them it will be part of FAQ once the new forum format roll out is complete I'll put the link there.

If ever this closes on it's own because of inactivity 30 days no post IIRC, let me or one of the other mods know so we can bump it to the top and reopen it.

Does anyone have a part # for a starter solenoid that I can cross-reference at gmpartsdirect.com?


Napa is the only part# I have on hand. It is ST151.

Here is my list of Carquest part #'s that pertain to the 6.5.

Lift pump- E3309

Serp. Belt- K061010

T-stats- 32089

Fuel filter- 86376

Air filter- 88441

Oil filter- 85060

Vacuum pump- 64-1018

pigtail socket- S638

Hydra. Boost- BBO527358

Coolant sensor- 207803

OPS- PS262

Remfg. Starter- 72-3296S

Glow Plug relay- RY-383

Does anyone have a part # for a starter solenoid that I can cross-reference at gmpartsdirect.com?

GM# 10456454 :)

If any of you need Napa part numbers for 6.5 stuff, shoot me a pm..I'll be happy to help...;)

GM part# 12559401

Both vacuum lines, from vacuum pump to solenoid, solenoid to WG. Includes wire loom, and all three (3) rubber fittings. Pre-bent and color-coded and ready to go.

Fuel manager filter screen 29244, this plastic screen goes in the base of the fuel filter manager, sometimes gets stuck in the old filter element and goes in the trash see pics here http://www.dieselplace.com/forum/showthread.php?t=75397

Again reserve this thread as a place to post pn's if you know one not request them, request for pn in a separate thread please, once you do find the pn then please come back and add it to the list.

1994-1999 VIN S Engines...
Intake, Plenum, Egr gasket set
Napa part # MS-15306-A (These are victor gaskets)

From the Major, S engine "mystery gasket"

It's labeled "GASKET-EGR VLV P" The ACDelco part # is 219-167 The GM part # is 10191428

From the Major, S engine "mystery gasket"

It's labeled "GASKET-EGR VLV P" The ACDelco part # is 219-167 The GM part # is 10191428

And to expand on this:
Napa part number for this gasket is 2-25203
Referred to as an EGR tube gasket in my system..

Also available from almost any parts house out there, but I'm willing to bet they'll have to order it.
Borg-Warner # EVG44
Carquest # VG61
Niehoff # FE345
Sorensen # 7792659
Standard # VG61


Not a mystery anymore :D

Dorman engine oil cooler lines for 1995 6.5 Tahoe 625-114 RH outlet, 625-143 LH inlet About $50 each
Dorman phone - 215 997 1800

Glow plug control relay 94 + years 6.5 TD vehicles O Riley's $47 with lifetime warranty their part BWD GPC5

WIX fuel filter 33376 $26

1994 6.5 F code
ECT sensor for PCM GM#15326386, ACDelco#213-928 (goes in the t-stat crossover)
CTS sensor for Temp Gauge GM#25037332, ACDelco#213-77 (goes in the drivers side head)

CDR VALVE
NAPA # 2-9445
Just labeled as "Valve" some years we looked up it would show this # as a pcv but others just said NA (like my 96)
Price is 44 bucks
Should be the correct part for any turbo 6.2 or 6.5 may be correct for n/a as well.

I would like to post a link here to one of DieselPro's posts regarding injector part numbers. Those numbers can be found here... (http://www.dieselplace.com/forum/showthread.php?t=114195&highlight=injector+numbers)

DS4-831-5068 Inj Pump Eprom - BPBN 16244854 w\4L80E

TSB 67-71-53A 16244781 - covers:

4L80E Upgrade to 5288, 5521, etc IP - BPAA 16216871

NV4500 upgrade -

More injector pump info (mechanical):

db2831-5722: 310HP "Marine" 6.5TD inj pump (4 roller head with 76mm^3 stock @3500RPM)
db2833-4974; 250HP "Marine" 6.5TD inj pump (2 roller head with 73mm^3 stock @3500RPM)
db2831-4911; Stock '92 and '93 6.5TD C/K inj pump (2 roller head with 59mm^3 @3200RPM)

Special thanks to DieselPro, TDG, GMCTD, and a few unnamed pump shops for this info...

Tools...


OPS Socket (can turn with wrench or ratchet) -- Lisle - LIS13150
Injector Socket (30mm - can turn with wrench or ratchet) -- Snapon - S6128
IP Timing Tool (use to turn IP) -- OTC - J-29872A
IP Wrench (for 15mm IP bolts) -- OTC - J-41711

94 Reg. Cab
I bought these from the stealer, can you say "rip off"
AC Delco and GM #'s are the same
LH 12463067 $46 CAN
RH 15043370 $57 CAN

CDR VALVE
NAPA # 2-9445
Just labeled as "Valve" some years we looked up it would show this # as a pcv but others just said NA (like my 96)
Price is 44 bucks
Should be the correct part for any turbo 6.2 or 6.5 may be correct for n/a as well.

CDR at Napa is a part # CRB29445 the guys here had a hard time with the 2-9445 number

94 f code reg cab

acdelco # D834
GM # 26019660

Mounts on the steering column, a real PITA unless you drop the column a bit.

Gator Razorback part number 4061010

Used when removed vaccum pump.

gm p/n rocker arm retainers #23500076

AC Delco "cooling system seal tabs" for minor coolant leaks part # 10953473. 6 in a pack for about $5. Crush em up and add to rad.

small hose connecting turbo oil return pipe to block pipe = 10149660
motor mounts = 15659675

Guys this area is for posting of known p/ns not a place to request part numbers

Socket to remove Injectors = NAPA BK 7002470

Turbo Wastegate Solenoid vacuum tubes harness: GM #10236929 for "F" Engine.

Stanadyne Replacement Fuel Heater with gasket (for 6.5TD): 31341P

GM replacement gasket for 6.5TD fuel heater: 12511962

Plug that fits into the connector on the FSD (plastic housing of that plug only):


ACD# 296-01
GM# 10191640


`ACD` is probably AcDelco. I got that plug because I want to replace mine, but now I need the contacts since it`s only the housing of the plug ... Stanadyne sells the complete wiring harness of the pump as a spare part.

Dummy pulley for going without AC compressor:


The dummy pulley comes in two parts, a mounting bracket and the pulley. They are genuine GM parts. The pulley has the part number (from the sticker on the package): Z39-107-C1, 1410-2597/Pulley ASM-Belt. There's a number encarved on the mounting bracket which is probably the part number of it: 12555023.

You can also get the mounting screws, but I didn't order them and obtained them locally instead. They have metric threads.

The parts seem to come from Atlantic Pacific Automotive. It's a bolt-on replacement, and you can keep your accessory belt because it's the same as with the AC compressor on it.


see: http://dieselplace.com/forum/showthread.php?p=822570#post822570

Coolant Thermostat:

I was told that two types of thermostats are available for my truck. Which one is in there can`t be seen before you take it out. (Once you open the thermostat housing, you must install a new gasket, or it will leak.)

I got a new thermostat in an AcDelco package, new gasket was included:


X53-106-B1
1255-9338
12559338


There`s another number on the thermostat I took out: 12551496. Afair they look the same, and the new one works well.

Pump mounted driver kit, p/n 12561590 \ 12562836
calibration resistor, identification number 1 p/n 12561886
calibration resistor, identification number 2 p/n 12561887
calibration resistor, identification number 3 p/n 12561888
calibration resistor, identification number 4 p/n 12561889
calibration resistor, identification number 5 p/n 12561890
calibration resistor, identification number 6 p/n 12561891
calibration resistor, identification number 7 p/n 12561892
calibration resistor, identification number 8 p/n 12561893
calibration resistor, identification number 9 p/n 12561894
Stanadyne thermal pad p\n 30598

Gm 25117340

P/N K061010 from Carquest Micro V (made by Gates) which is around 101.

Flange Gasket.............14098654

1" Hose......................10149660

Engine Block Gasket......12551502


__________________

FelPro Head Gasket Set (need 1) for:
6.2L Diesel Vin Code "C" 1982-1993, and 6.5L Diesel 1992-1999
Does not include head gaskets or head bolts.
HSU 8726 (replaces 14044934)
------
FelPro part #s for individual gaskets included in HSU 8726:
5112 Valve Stem Seal
35271 Water Outlet Gkst
35289 Water Outlet Gskt
35357 Water Crossover Gskt
35710 Thermostat Gskt
60555 Air Cleaner Gasket
91585 Intake Manifold Gskt
MB 91587 Exhaust Manifold Gskt
91599 Valve Cover Gskt
91600 Injector Seal Washer (copper washer)
95761 Fuel Return "O" Ring
95786 Fuel Filter Gasket
------
FelPro Head Gasket (need 2) for:
6.5L diesel 1994-1998 and 6.5L Turbo Diesel 1992-1998
9701 PT (replaces 12554979)
------
FelPro Head Bolt Set (need 2) for:
6.2L and 6.5L Diesel 1982-1996
ES72724 (17 bolts) (FYI, individual bolt PN is 94521)
------

I'd like to suggest that posters try to put who's part number they list (i.e. FelPro, GM, etc.), and what year and model vehicle it is known to fit.

Technically not a PN, but the tap needed to clean head bolt threads is:

12m-1.75 thread cleaning (aka "chasing"), bottoming tap

GM part numbers for O rings and copper gasket for a 94-95 - 90º oil filter adapter
Big O ring 12559095
2 small O rings 23500360
Copper gasket 23500358
Engine block fittings for stock oil lines 94-95 15718023

I got them from P&G Chevy. Adapter rings and gasket were $7.55
Engine fittings were $13.12 each
Ted

Steel barbed fitting with machined-in restrictor to replace the heater hose quick connect on the thermostat housing.

GM#15963984 or AC/Delco#15-30569

This is what I used on my '99 Sub.

NAPA's part number for the CDR valve 6.5L engine 92-02.
# 2-9445 except they call it a PCV valve

Delco 9 blade 20" steel P/N 15992650
Delco 9 blade 21" PLASTIC P/N 15010202

Should fit all 1997 and up, BOLT on fan clutch

NAPA's part # for ignition starter switch ECHKS6196
'' '' # for igniton switch actuator BK6202246
'' '' # for igniton lock cylinder and keys ECHKS6043

Lower cost wastegate solenoid from Rock Auto:

Airtex #2N1094

I pulled it out of the box, saw the green dot - sure enough it had "Delco Remy" molded in the side! :cool:

Map Sensor for my 1995 K3500 was listed in the parts catalog as a Delco 213-1545 OE number 12569540

when it really needed a 213-1520 OE number 12569541 - watch the keying on the 3 port plug!

12553405 (GM) Dual-thermostat housing 1580782 (AC Delco)
12564276 (GM) Dual-thermostat outlet 151753 (AC Delco)
12559336 (GM) 195F thermostat for dual 131103 (AC Delco)

EGR metal blockoff lower intakes-Victor Reinz MS15335A

May still be available at NAPA as old stock from before NAPA switched to FELPRO. You will need to ask for FELPRO MS91585. The Victor set comes will lowers, upper plenum and EGR gaskets, the FELPRO only has the lower gaskets.
I don't know who carries Victor gaskets anymore, if someone knows, please post.

It sunday night and you need a starter bolt and Advance is the only place open here there part # 72181 that for 97

I replaced my rear axle seals 2 months ago, they started leakin' again this week. This time I used a kit. It came with the seal and speedi-sleeve.
This is for a full floater.
CR (Chicago Rawhide) axle repair kit #28446
Seal in kit is #28426
Speedi-sleeve in kit is #99282

This is the socket for removing the rear wheel hub retaining nut on full floating axles.

OTC Wheel Bearing Locknut Socket.. No. 7090A


It says on the package for 73-81 GM 4wd 3/4 and 1 ton trucks, but mine is a 98 and it fits exactly. I guess they need to update the packaging.


http://i30.photobucket.com/albums/c348/kaaooga3/diesel%20place/CIMG5079.jpg

Starter motor bracket. GM # 14028931
Oil filler neck for a 95 6.5 motor (alternator passenger side). GM # 12556499.
(6.2 Oil filler neck - GM #14071059)

Brake/stop light switch......acd#D1565E
GM#93801734

Ac Delco starter(reman)......acd#336-1912
GM#19136221

OEM fuel tank module
AC DELCO p\n 25027459

Optic Sensor Filter
GM # 12553327 electronic noise filter

relay 85-93 ish, 6.2 and mechanical IP 6.5, 12088520 p/n

The Delphi catalog from 2006 lists part number HDC904 as being the correct application for 1985-1993.

Delphi glow controller 1994 and up pn# HDC907
Goodyear upper rad hose 1994 pn# 61530 (stock application)
Cloyes three piece timing chain / sprocket set 1994 up pn #C-3097

Replacement OPS was a GP Sorenson p/n OPS132 "rest of the story is in lift pump reference thread"

Vertical link kit for sig truck....
GM#15635936

pitman arm for sig truck.....
GM#26033290

GM Part Numbers based off of 1996 C3500:

52491622 - Radiator
10409635 - Radiator Cap
15683910 - Lower Rad Hose
15977350 - Upper Rad Hose

12561092 - Drive Belt Tensioner
25098706 - CDR Valve (Tuna Can)

Regards,
Mike

Injector/IP fuel return line kits:

replacement return line, Diapaco part D14066305

Dipaco also sells it kitted in precut lengths 9" IIRC which are part of injector only change kit pn DPE62120 or IP swap kit DPE65100

rubber caps FYI for last 2 injectors in the bank are pn D14066301
GM has em also but any shop that deals in Dipaco parts can get them & may have on the shelf already less than GM I suspect.

Turbo oil supply line(hose) GM# 12562378

Will add water in fuel sensor o-ring and fuel heater o-ring as soon as I can figure out which part number is which.

Water in Fuel sensor o-ring GM#12562378
Fuel Heater gasket GM#12511962

Vacuum pump removal factory DUAL ALTERNATORS Goodyear Gatorback # 4061187

FSD male connector (410015) is available individually at Casper Electronics for $14.95 and includes the six male terminals. Item cannot be purchased over the website (casperelectronics.com), but can be ordered via phone at (847) 247-0484. This is the same connector used by a current vendor for their 40" and 72" extension harness.

Credit to andy2turbo for the find!

JiFaire edit: FSD is the same as PMD - (I put this here for searching purposes)

Minor typo 89swb. It is Casper's Electronics and (casperselectronics.com)

Braided metal Ground straps from chasis, to engine and firewall.
GM P/N 12160485

Braided metal Ground straps from chasis, to engine and firewall.
GM P/N 12160485

try these, sorry
12157185
12132154

1998 oil pump
Melling M-255-2945
Napa 601-2091
Federal-Mogul 224-43621 bar code 14046 87557

Tools...


OPS Socket (can turn with wrench or ratchet) -- Lisle - LIS13150

nope. LIS 13250

I am fairly certain though being a 97 that yours will be the same as mine a metric straight thread of the size M27 x 2.0. You can get fittings from Parker that come with a straight thread on one side with a Viton O-Ring to seal and the style of fitting you choose on the other.

The fitting that I used converted from the M27 x 2.0 to a 1/2" female NPT Parker part# 222P-8-M127, this will be in brass.

Delphi glow plugs

p/n HDS306 for 6.2 C/J
HDS309 for 6.5 S/F/Y engines (94-00 years)

97+ dual t-stat parts
water pump 88894036
t-stat crossover 12553405
outlet 12564276
t-stat 12559336
upper hose 15977350

vacuum pump 7849209
oil fill cap 12553195

injection pump swap gaskets
10137486
10137537
12531704

outside mirrors- black power non-heated
15764757
15764758

PCM 88963802
Eprom 16244788
Crankshaft position sensor 12557046
fuel filter 88915464

4L80E input/output speed sensors (2wd both and 4wd input) 24203876
Connector for ISS/OSS 88987978

front brake pads- 2wd 8600GVWR 18025354
2wd front wheel bearing grease seals for same 15651661 (2 needed)

Higher PSI lift pump (verify; I haven't installed yet but looks correct) 25115224

Optical sensor filter harness 12553327

All GM numbers, apply to Suburban in my signature

Gm#15954812

autolite glows p/n 1110

replaces AC-11G, Autolite 1105, Bosch-Champion-Motorcraft

Just picked up a couple paks of GM Cooling System Seal Tabs. pn 12378254 . 5 tabs to a pak. List price $ 6.70/pak.

Not sure if this pn supersedes the pn 10953473 that is listed elsewhere on the forum and in this thread, but "stealer" parts man said the 10953473 number was no good???:confused:

Felpro Intake Plenum gasket (upper intake) MS90671

Map Sensor for my 1995 K3500 was listed in the parts catalog as a Delco 213-1545 OE number 12569540

when it really needed a 213-1520 OE number 12569541 - watch the keying on the 3 port plug!

For some reason the above part numbers don't work on GM partsdirect.com. Only 12569240 shows up under MAP sensor. Is it the same sensor for gas or diesel?
Thanks.

Latch to repair the glove box on 1994-1995 trucks : GM # 15545967

Brace, starter motor to block, sometimes refered to as a bracket, GM Part # 23502557

Recovery tank, or called overflow tank, Cooling Radiator Tank Surge for 6.5 liter diesel, years 1997 to 2000 : GM part # 15156662

Recovery tank for 6.5, years 95-96 GM part # 15678943

Accelerator Pedal assembly with position sensor for my truck

oem 15751307

Delco 213-2820

Trucks moves a lot smoother today!:)

the part # for the fuel cap is 15763229 for my 98. It should work, but double check with GM for yours. List just over $15

Fel-Pro Timing cover set
Part #TCS 45554
Covers all 6.2 & 6.5 engines from '82 - present
Has all the gaskets you need for water pump, front main seal, timing plate to water pump, timing plate to block, t-stat crossover, etc.

Injector return hose...GM #14066305...$24.50 :eek: for one

Clamps for return hose...Napa #705-1220..pack of 16...$8

Injector return hose...GM #14066305...$24.50 :eek: for one

Clamps for return hose...Napa #705-1220..pack of 16...$8
For the rest of the Canucks, The clamps are also available from PartSource or Canadian Tire in the HELP! Section in packs of 16.

Water-in-fuel sensor O-ring (to filter housing) 12511959 (GM)

(From Phantom 309)

DS-4 Optic Sensor - Stanadyne part # 33883

Turbo Wastegate Actuator - vacuum based.

Application: 1996-2000 Chevy/GMC 3500 6.5L TD G-Van, 1996-2004 Hummer H1 (Center Mounted Turbo)

Part # 12456424

List price = $398

-Steve

Oil filler tube : # 12562430
90° Oil filter adapter : # 12559093 (fits 88-91) not sure for 91+

I had to dig around, but I was able to find every (or at least most ) precup part #'s.

Discontinued part #'s

23500082 - 1 dot - 6.2L "C" code - 1982-1990

14525518 - 3 dot - 6.2L "J" code and military - 1982-1990

10149688 - 3 dot with a @ (circle A) - 6.2L "J" code and military - 1990-1992

10163707 - 1 dot with a © (circle C) - 6.2L HD/Commercial - 1992 only


Currently available part #'s

10149630 - "T" - 6.5L "F" code - 1993-1994

10230426 - Square - 6.5L "Y" code (and presumably military) NA - 1994-up

10149629 - Circle - 6.5L "S" code - 1994-up

10183926 - Diamond - 6.5" "F" code - 1997-up


You will notice that there are some holes in the listings. For instance, what cup was used in 1991-1992 "C" code motors? Also, there is no mention of what cup was used in the 1995-1996 "F" code 6.5's, although I believe it was the "T" cup. If anyone can fill in the holes, please do.

Also, the old "fuel economy" 6.2 cups are no longer available. I don't know this for sure, but I would bet the "Y" code 6.5 NA cup would give the best economy out of all the currently available parts (it has the smallest throat out of all the 6.5 cups). The "Diamond" cups are generally regarded as the best for maximum power in turbo apps.

I just got back from the Stealer regarding a cup for my truck. I took the part number for the "Square" cup here and according to the database there, this precup was for 1995 and newer "S" motors.

P/N 23500076 Engine Valve Rocker Arm Retainer (plastic)

GM performance parts has a standalone Transmission controller for 4LxxE trans's.

GM # 12497316 - Transmission Control Module Package - Transmission Control Package For 4L60E/4L80E

gmperformanceparts.com

PMD Extension-cable builders rejoice! jmiller found the end parts, tried them out, and says they fit!!

Here is what information I've collected to build a cable.

Mouser Electronics,
P/N 829-12066317 - sealed connectors
P/N 829-12103881 - female terminals

Casper Electronics
410015 - connector (mates with 12066317)
504008 - male terminals

Just got the parts from Casper's.

First off, service, A+.

Pricing, A+

Delivery time, A+++

Connectors fit like they were made to! Snug, solid fit. No tape will be needed with these. Secondly, I ordered them at 2PM yesterday and had them to my door at 1PM today!

Well done, guys!

For those of you with G-Van engines that have done the Turbomaster mod, here's the belt if you want to remove the Vacuum pump.

Goodyear Gatorback. Part # GTR-4060995. It's a 99.5" belt.

For 1996 to 2003 Hummer H1's, you also need to take wire and set into position the A/C Vent Acutators.

-Steve

Hey guys, sorry I'm at work so I don't have time to search if it's been posted before. But Napa part number for the terminal spacers is 728193.

If its not there maybe a mod can put it in the sticky, if not delete this.

later guys

Steering wheel position sensor part number: 26064468

96 3500HD Trans Cooler

GM# 52497753

GM#12511963

You'll need a new one if your stock fuel filter gets replaced by a Baldwin filter and the stock ring gets discarded and you want to go back to an original type filter.

A/C port part numbers from torque454

High pressure A/C service port / valve

Part number 52458184. http://catalog.oehq.com/item.wws?sku...US&weight=0.10 I just bought one, it was about $15 from the dealer. You can get a cheapie at oreilly or autozone but their quality is questionable. Might as well replace the valve core for the low side, another $10 at the dealer. Part number 3041827 http://catalog.oehq.com/item.wws?sku...US&weight=0.10