|
94turbo 01-08-2006, 07:43 PM I recently purchased the wrong type of boost gauge. It came with the "T" Fitting to put into the mainfold line for vaccum and boost. I was wondering if i could buy the other fitting to go into the upper intake anywhere. Or if i have to buy another kit for it. jlwest63 01-08-2006, 08:43 PM I am not an expert but mine seemed just like an oil pressure line and fittings for the boost gauge. I would say you could buy a new line and fitting kit for an oil pressure gauge and use it. Anyone else think this would work? txguppy 01-08-2006, 10:03 PM Yea you can get a 1/4" or 1/8" NPT fitting w/ proper sized flare nut connector for your tubing at auto parts stores or Home Depot kinda like this one on the top left but not 90*http://www.mcmaster.com/param/images/brassppf/tubefittings.jpg (http://www.mcmaster.com/param/asp/psearch.asp?FAM=brassppf&FT_1286=57938&FT_138=49043&session=desc=Pipe%20Fittings;brassppf;1286=57938;1 38=49043) | ||