Just put in the edge w/attitude, 4" summit exhaust my truck has crazy power now!!!!! its a 04 CC short box with 6" lift... My question is what does load and slip do on the attitude monitor? and what is best to drive around daily in that wont toast the tranny


I have it set on power level 4 and boost 4 with defuel at shift 4-5


Power level 5 and boost 5 is a little to squirrley if ya know what I mean. Feels like something will break sooner rather than later on that setting.


Edited by: bighd

I run mine at power 5 and boost 5. Defuel on 4-5.


Slip is what % your converter is slipping.


Not exactly sure about the load.

I don't know for sure what the load value is, either, but I suspect it's reading the injection demand signal and giving you a percentage value for what the ECM is deciding is needed for feeding the engine. I just put my Attitude in before making a Florida run and tried to equate the load value to my cruising efficiency on the interstate. Seems that 2000 to 2200 rpm, what I considered a "sweet spot" before the Attitude gave me a pretty constant 30-38% load pulling my trailer on level ground. Interesting that load is 20% idling at a light against the torque converter and will go to as low as 10% coasting downhill.