Okay,

I did the paper clip code read to see what codes would come up. Since I am not real smart or mechanical on these codes, here is what I got.
When I turned on the key it did this,

SES light flashed twice
paused,
then flashed 9 times consecutively,
paused,
flashed twice.

then repeated above sequence
:confused: :confused: :confused: :help:

code 29-glow plug relay fault, most likely a bad glow plug relay

Okay, with that out of the way, what is the price and where is that thing located? I really appreciate all the help on this site.

You guys are great:cool2:

Under $60 at most any store, located at hte rear of the engine on the drivers side by the fuel filter.

Thanks for the help dude:ro)

Now about that fish in your sig, wife was wondering what it is(me too)

The story is in this link.
http://dieselplace.com/forum/showthread.php?t=57673

Go check to make sure the 2 big nuts for the main electrical cables are *tight*.. I have had a code 29 several times and it just meant that the nuts were loose.

Worth checking before ya buy a relay.

Where would this be located?

Where would this be located?

have you found the glow plug relay yet? theres two nuts under some rubber covers on the glow plug relay check thoes

Once again the knowledge and help on this forum is great. Thanks you guys.:grd: :thankyou2 :duh:

You find it yet?? If not I will take a pic in the morning.

Here is a pic of the relay from Turbine Doc's pictures FAQ

http://www.dieselplace.com/forum/attachment.php?attachmentid=6940&d=1122611217

Yes, and make sure that they are TIGHT too. If not, they will melt down the relay. I have a thread from last year on this showing the aftermath of a melt down/loose nuts.