|
scottdcoffey 12-19-2005, 01:32 AM My engine light comes on when I "get-on-it" without letting my tranny temp get up to 130+, I had the codes check and they are: I cant find the sheet I wrote them on...any ways, two were something to do with the EGR and the 3rd was turbo under boost. Do I need to put an EGR blank-off on? marksrt43 12-19-2005, 01:48 AM do you have a modified, or larger free flowing exhaust? I got those EGR codes until I had a EGR code eliminator installed.... not sure why the turbo code? You might want to call banks see if their unit might cause that..... Fingers 12-19-2005, 10:18 AM Look here (http://dieselplace.com/forum/showthread.php?t=21428) scottdcoffey 12-19-2005, 10:20 AM Yes I have a larger exhaust. Where did you get the Code eliminator from? beermccoy 12-19-2005, 01:46 PM Scott, Fingers mentioned it above... See his link. Look here (http://dieselplace.com/forum/showthread.php?t=21428) Code blocker, a.k.a. Finger Stick. Pretty sure Kennedy sells the sticks. Cheers. cajthaml 123 12-19-2005, 05:11 PM I have 2006 LLY, and I just put a magna flow 4" with no cat. I drove for 20 miles and the check engine light came on. I have heard about this finger stick, do they work or should I put the cat back on? Thanks Brent jwfab1 12-19-2005, 08:13 PM Fingersticks work!! I have one. TxChristopher 12-19-2005, 08:39 PM ! Does anybody have the part # for the fingerstick? My dealer looked and looked and looked but could not find it. :confused: By the way Jon thanks for the cd ;) a_chevelle 12-19-2005, 09:51 PM :funnypost jwfab1 12-19-2005, 11:41 PM Dealer replaced mine under warranty. They said it went bad becasue I was running Edge on number 5. I'll have to check my paperwork for a part#.:Nothing_f :eek: briano 12-20-2005, 08:41 AM that latest PCM update to 0401 and 0402 fixed this on many trucks, but if not then the Finger Stick is the way to go. Very easy to install. | ||