|
: Clutches done yet and how much we talkin JM2500HD6.6 12-10-2005, 01:36 PM Im greatly in need of a clutch and im wondering if these new clutches are done yet and if so how much can i expect to pay. Also wondering if the single disk clutch is strong enough to hold the edge with attitude and a superchip. Let me know thanks. IBDMAX'IN 12-10-2005, 06:36 PM Im greatly in need of a clutch and im wondering if these new clutches are done yet and if so how much can i expect to pay. Also wondering if the single disk clutch is strong enough to hold the edge with attitude and a superchip. Let me know thanks. The single is no where near complete, Peter at SBC will be starting the single disk clutch project as soon as the Double disk kit is complete. We are nearing completion of the double disk clutch and it will hopefully be available within a short time period. The double disk kit Retails for $1795 and the single is yet to be determined but is estimated to be around $1000. The single will have no problems holding the power that you just discribed, if you wanted to go with some custom tuning with Nitrous or Pane then I would recommend going with the double disk. If your in immediate need of a clutch then I would talk to Evan at Crank It Up Diesel, He's my competition but I have no problem recommending him or the product that he sells, I don't think that you'll be dissapointed with it's performance. But if wanted to wait a little while untill the SBC kits are complete then I would be more than willing to take care of you. If you have any other questions feel free to give me a jingle. 303-931-0674 or just shoot me a PM, I'm always willing to help out in anyway I can. Cheers, Wade Super Diesel 12-14-2005, 12:39 PM www.dynadroitclutches.com . This is the company that is testing the SB clutches right now. duramaxphil 12-14-2005, 04:30 PM Will single disks hold up to 500 horsepower??? IBDMAX'IN 12-14-2005, 05:55 PM Will single disks hold up to 500 horsepower??? Peter estimates that the single's should be capable of holding that kind of power but we won't know for sure untill the single is completed and tested. If you have any questions just let me know. Cheers, Wade Deadeye 12-14-2005, 05:57 PM Will single disks hold up to 500 horsepower??? don't want to make an assumption until I test it. BTW, it is already into development. Hope it will show up for testing sooner than anticipated!! Super Diesel 12-15-2005, 02:03 AM ;) :cool: ;) | ||