Getting ready to take the truck in for injectors Monday, and was wondering if any of you that have gone through this before had any advice on what to ask the techs, or things to watch to make sure they are doing things right.

It is my understanding that if you have one injector out of spec, they replace all eight correct?

I believe you are right about 8 new injectors for one. You might also ask them "whats different about the new injectors, that hopefully makes them better than the old ones?" Also they said they dumped the coolent when they did mine and replaced it with new coolent, but said I would still need to replace it at the recomended time. So you might make a deal with them that they flush the system when they do the injectors so you don't have to. Then watch coolent level for a few hot/cold cycles ta make sure it's topped off. Good luck with the work and let us know how it came out!

Thanks Mike.

Just had this done early this week to mine. Both times they replaced all eight injectors. I know that this time that there was mabye one or two that were out. Balance numbers wer +4 to -6.

What dealer did you go to? Did you have any other symptoms of injector failure besides bad balance rates?