bronxboy
12-06-2005, 09:52 PM
Whats up with this,I have 2 miles on my new truck and the heated seats dont work!I push in the button and all the lights flash and go out.I hear something clicking under the dash area when i push the button.
It says in the manuel that you press button for desired level,but nothing stays lit, all three amber lights light up quickly then go out:( .Other than that and a tear in my drivers side door panel i love it.Im thinking a loose connection or something stupid i hope..
txguppy
12-06-2005, 09:56 PM
My lights stay on, then decrease each subsiquent press.
VC-17
12-06-2005, 10:40 PM
My lights stay on, then decrease each subsiquent press.
YUP!, and the heat FRY'S my A$$ and back!
simicrintz
12-06-2005, 10:44 PM
bronxboy-Sorry about your seats; can I have the car in your avatar?
bronxboy
12-06-2005, 11:05 PM
bronxboy-Sorry about your seats; can I have the car in your avatar?
Sorry i sold it 6 months ago to a guy in california.I am building a chevell now.I will keep you in mind.:ro)
Firefighter
12-07-2005, 10:50 AM
I know this is off topic, but what year are you building? Details!!:drool:
Our heated seats would not respond for about 5min one day. They've been working since though.
Brockway
12-07-2005, 02:52 PM
Once in a while when I start my truck they won't work but if I shut it off and start it up again, they work! Is GM running MS Windows in these things?
Kemosabe
12-07-2005, 02:58 PM
Whats up with this,I have 2 miles on my new truck and the heated seats dont work!
:rant: I sympathize with you, BUT... This is the wrong thread for your (sad) story...
:offtopic:
bronxboy
12-07-2005, 03:13 PM
I know this is off topic, but what year are you building? Details!!:drool:
I am building a 70 chevell.I have a 383 stroker motor out of another car that i want too put in the chevell:eek: this motor is pushing well over 425 horse without the juice.Got too love the high reving engines.Dont no yet if we are going auto or standard shift?? But i already have a turbo 400 with a 3500 stall if i need it.:grd:
lklndoo
12-07-2005, 05:54 PM
My heated seats quit working the 2nd day that I had my truck. I removed the fuse, which is located in the fuse box on the driver side of the dash, and reinserted it. The heaters have worked fine since then, the fuse must not have been seated properly. Just something you might try.
LeadfootDuramax
12-07-2005, 06:23 PM
My mom's caddy had the same thing. New and the seats didn't work. No fuse in the fuse block. Apparently an oversight at the factory. Check the fuse and make sure it is good first.
GMC2500HD
12-07-2005, 07:58 PM
This goes in the interior section. Not sure how it got here. Please post in the appropriate section...