Ok as you all know some of us were cheap and ordered our trucks not fully loaded. Some of us got the Worker edition DURAMAX!!!!!!:p: As you are all well aware that model does not come with the factory fog lights. So I ordered a catalog from my friends at PERFORMANCE PRODUCTS and saw a new light setup. It's the PIAA4000I kit. It says it has 2 settings and can adjust with your low and high beams. It is bright and at a price of $347.95 it looks better than going the stock OEM and spending $500 through the dealer. What do you all think? Thanks for any advice you can share on this matter.:)

BIGNASTY

no one has any info on this and cant help me in anyway???? WEIRD!!!!

BIGNASTY

I don't know about the PIAA's, but you can get the whole deal from the dealer for about $100.00. I did this on my 99 silverado. Kit came with two factory fog lights and the factory switch. Truck was already pre-wired so it took about an 1 hr. or less to install everything. You have to get the dealer to program your truck so it knows the lights are there. That was about $25 and took about 10 min. :)

its 250 for the 2 lights and wiring kit, and 200 for the install of it all and the programming from the dealer.


PSS> These new PIAA silvedado P-4000 light kit will also provide extra parking lights and/ or extra turn signals. :):):ro)

BIGNASTY

its 250 for the 2 lights and wiring kit, and 200 for the install of it all and the programming from the dealer.


PSS> These new PIAA silvedado P-4000 light kit will also provide extra parking lights and/ or extra turn signals. :):):ro)

BIGNASTY
:eek: Well..crap. Those prices have shot up since 2000. I'd just get the PIAA's then.

its 250 for the 2 lights and wiring kit, and 200 for the install of it all and the programming from the dealer.


PSS> These new PIAA silvedado P-4000 light kit will also provide extra parking lights and/ or extra turn signals. :):):ro)

BIGNASTY

Your stealer is giving you the shaft, I can get the kit for 200 from the stealer here. You should just buy the kit and do it yourself it is not that hard.

IIRC I thought I saw the kits...switch and all for $125 on e-bay... easy to install your self you just need to have the dealer turn them on...

IIRC I thought I saw the kits...switch and all for $125 on e-bay... easy to install your self you just need to have the dealer turn them on...

If the wires are the (pre-wired) I don't think you need the dealer to update the computer, didn't have to for my 2003, and I got the whole kit from the dealer for $165.00.

Got the whole kit for $175.00 from dealer, including the new airdam, switch wiring harness. easy to install, my truck didn't need to go to dealer to activate. my trucks build date is 5/05

Things must have changed. On my 99 I never had to buy an airdam or anything. I already had the holes in there for the lights and my truck came from the factory pre-wired and I still had to get the truck programmed. I'd just get the factory crap. Good enough IMHO...;)

Got the whole kit for $175.00 from dealer, including the new airdam, switch wiring harness. easy to install, my truck didn't need to go to dealer to activate. my trucks build date is 5/05

HuH mine was built around there but I dont think I have it prewired on the workers edition. I see i have to cut the plastic out and I think this PIAA kit would be better than the stock fogs anyway. I don't know what to do but I must have more light on the truck. It is too dark driving around at night on all these dark streets. Thanks for any advice or help. BYE!!

BIGNASTY:grd:

i still cant belive we have to have our trucks programmed for lighting. what happened to the good old day when a switch was a switch and a wire was a wire.

I dont know but I can't wait to get these PIAA lights. They look great!!!:ro)

BIGNASTY:grd:

did you order them? if not, i have a set of factory fogs that i took off my truck when i put on my Buckstop bumper, i used the wiring for the new lights but the old ones are still in the mounts. Just a thought.