THe PRD321 and odometer are not lit up. THey just kicked off and will not come back on. I checked all the appropriate fuses and all are good. Truck runs fine and attitude shows gear selection since the dash will not. I guess I will have to remove dash next. Any suggestions would be good!

obvious comes to mind first....NSBU switch

Call me in the morning.

Thanks mike. Will do!

Could be fuse or ignition switch. That whole display is controled by a second ignition circuit. Check the fuses under the hood before you go to much further.

Could be fuse or ignition switch. That whole display is controled by a second ignition circuit. Check the fuses under the hood before you go to much further.

MAX THanks,
I just had the ignition switch replaced a month or so ago because the whole cluster had quit working. Now all guages are working except for the ODO and gear select. All fuses that pertain to that function have been checked with a test light and visually inspected all appear to be fine.

I have a friend with the same problem.. Anyone ever resolve this issue??

MAX THanks,
I just had the ignition switch replaced a month or so ago because the whole cluster had quit working. Now all guages are working except for the ODO and gear select. All fuses that pertain to that function have been checked with a test light and visually inspected all appear to be fine.

ive got the same prob right now,,,
the cluster stopped working couple months ago, mess around with the connections, started working,
after a while, the selector indicator only shows when it wants to.

Sorry for leaving you guys hanging. I ended up having to buy a guage cluster. Apparently the gear portion of it failed but you can't fix just that part. That was not a cheap fix. Hope this helps.

I'm sure it's not what he wants to hear, but I appreciate the help, man!!