|
chevyburger 11-20-2005, 06:56 PM has anyone tried the fabtech front end upgrade kit? it comes with idler and pitman arms tie rods and sway bar end links. maybe steering satbilizer also. i have a 4" rancho lift with 33x12.50 R18 tires. in 14,000 miles i have broken the sway bar end links 3 times and broken a tie rod. 66flh 11-20-2005, 10:24 PM I have the Fbatech kit on my HD2500 with a Fabtech 6in. lift..Seems to work great although I did lose a little turning radius due to the massive size differance between the stock pitman arm and drag link and the new parts..But I have been rough on it and havent broken any more tie rods.:):) Silverado Man 11-20-2005, 10:37 PM I have it as well, very beefy and a nice setup. Although my stabilizer started to leak after 1 week. Mike SS Predator 11-20-2005, 10:41 PM I just installed the kit on my 2002HD C/C 4X4. Everything but the steering stabalizer will work on your kit. Your lift already has the stabilizer, so you will save a couple of bucks by ordering it without. tmboughton5 11-20-2005, 11:05 PM Can you put this on a non-lifted truck and how much is it? noreaster 11-20-2005, 11:25 PM Yes & about $300, DPS carries them on here, look in the vendor section. | ||