I have noticed fuel or oil on the top of the engine around two of the injectors. I only have 7000 miles on the truck so I have not changed the fuel filter yet (so it is not spilled fuel). I have attached some pictures. I was wondering if this leakage is normal? I have a 2003 2500HD.


Thanks.





http://boiseaeros.com/custom/images/driver_s.jpg





http://boiseaeros.com/custom/images/driver2_s.jpg





http://boiseaeros.com/custom/images/pass_s.jpgEdited by: FourBeer

I would have it checked. It could be crankcase blowby getting past the rubber grommet.

I would suspect that the feed lines were not properly torqued. Its coming up through the fitting.

I would suspect that the feed lines were not properly torqued.* Its coming up through the fitting.

Mine did the same thing at about the same miles, only 1 injector feed line. Tech torqued it properly and no problems since. SPICER

is it dripping wet or looks like seapage. if seapage get the rubber pass through gromet replaced.

It is not dripping wet. It looks like seapage to me.

I'm going to take a look at mine now and make sure there is no problems.