tts performance [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: tts performance


600+duramax
02-12-2004, 11:37 PM
A friend of mine told me he saw in a magazine a tts performance duramax make on there competetion module and a lift pump make 530 to the tire with just that one module. He also told me that the truck ran in 12 second range in the quarter.Does anyone know anyone that has tried this module with these results??Edited by: 600+duramax

DIESEL 5
02-12-2004, 11:40 PM
Are you talking about TTS now???? http://www.dieselplace.com/forum/smileys/Confused.gif

Diesel Power
02-12-2004, 11:44 PM
TS Performance is Dennis Perry. I would ask or PM him as he posts here. he has a thread in the get togethers forum.

600+duramax
02-12-2004, 11:49 PM
No I am talking about Ts performance.I would much rather here from an independent source that has tried it.

DSTRBD
02-13-2004, 01:48 AM
Dennis does not currently have his own module. He has DMAX modules, but not ones that he personally tunes.

600+duramax
02-13-2004, 02:03 AM
well I do not know who's it is but they said it was theirs in the magazine and I spoke to a guy there the other day I don't remember his name but he told me that it would make 530 with just that module and he said it was 1200 bucks and it would take a couple of weeks to get it.

Diesel Power
02-13-2004, 02:32 AM
That sounds like TTS. i believe it was recently featured in a magazine article. Unless you mean an advertisement, in which case i have no idea. you might want to go ask the person who told you..

600+duramax
02-13-2004, 03:32 AM
diesel power you were right just got off the phone with my buddy and he told me it was tts and not ts do you know anything about this module and there claims?

CPMac
02-13-2004, 10:27 AM
I know it won't make even close to 530 and they are very hard if not impossible to get for the average person. They have been talked about for quite a while but it is mostly hype because there is only a handfull of them out there, and if I heard right they massively underproduced the claimed hp that you talk about in the magazine and other claims by the manufacturer to the tune of -60 or more hp.

Diesel Tech
02-13-2004, 01:21 PM
600+


The truck in the magazine did make the advertised Hp and did run the times stated not only on one occassion but on several. CPsmac's problem is that it has been dyno tested on two ocassions by forum members and beat his beloved Quad 215 on both tests. In one test our 120 Hp version was only 8 Hp behind his beloved 215! The tests preformed by the members showed it didnot preform as we advertised and we are working with them to find out why. In any case it is still the most powerful single program on the market today. We do control who we will sell it too, as we feel it's a race only product and requires other modification on the truck to get it's full power output.

Duramaxdad
02-13-2004, 01:46 PM
What magazine is it in??? I have been looking for some publication catering to the diesel guy!

White Duramax
02-13-2004, 02:35 PM
It was in one of the four wheel drive magazines. I have it I'll have to look, Im pretty sure it was Four Wheeler.

blackjet
02-13-2004, 05:44 PM
it was in Peterson's 4 wheel drive mag. I got a 120 pcm from steve cole a lil over a year ago at least that what they said it was. I ran it for almost a year it was alright ,I had it stacked with a hot juice. 2 years ago with stock tranny i dynoed it at Scheid's with the 120, 90 horse juice, stock tranny, it totaled up to 383 hp and 800 something torque. I had it flashed (erased to get a quad) I dynoed last year with my truck ats tranny, quad 215, and cpmac's van aaken, it was 500+ hp and 1000+tq, so you tell me which is better! hey tts boys you bring your sh*t I'll bring my sh*t and we'll getit on out on the track this year, let's do it in the dirt too. Take care. Edited by: Mackin

Mackin
02-13-2004, 06:13 PM
BlackJet


First off nice numbers .....


Second Quad 215 EXTREMELY kicks *** ***. bye we are trying are best not to turn each performance thread into a pissing match ....


To everyone please choose your words wisely ,thanks ....


I'm happy that you are pleased with your combo .... I too wonder when the TTS extreme will break the "single" 500 HP tuner ....


Not looking for a ringer, something close for all us knuckle heads to had ... I could live with 499 RWHP ....That would be close enough ...


Again Please ALL self moderate ............





Mac http://www.dieselplace.com/forum/smileys/Approve.gif

RanaExcavating1
02-13-2004, 06:20 PM
Well said Mack!

600+duramax
02-13-2004, 09:13 PM
If it will make 530 by itself I will take 2 I have yet to see a single mod make that much power but then again I haven't seen much.If it is garanteed I will take 2.

Diesel Tech
02-14-2004, 12:19 AM
As soon as we find out why these are not all performing the same, the dyno results will be posted by the members so you can see for yourself. From that you can make your own decision as to weather or not you want one.

Mike L.
02-14-2004, 12:30 AM
blackjet


Go back and re read your post and #'s. An Edge alone will bring you close to your posted #'s alone, and a TTS program will put you right there at 380hp. Now you say you stacked to great products together and did barely achieve what each one would have given you. What's wrong with this picture? Sounds to me like maybe you let your dog tune your truck while you whipped down a few cold ones.http://www.dieselplace.com/forum/smileys/HiHi.gif I don't doubt your #'s on your second tune, they make sense.

CPMac
02-14-2004, 03:16 AM
Steve if your going to talk about my "problem" then you should get it straight. My problem is your lying and misdirection advertising. If you are going to classify your extreme program with the Quad and others then you need to release them to the general public not just a couple of trucks. If your truck actually made 530 that is great but your own test truck should make big #'s. It just seems none of the programs you sell make anywhere near what you claim your truck did. The Quad is right now the best performing single program available to the public. If you want to start producing several of these and selling them to the public and can make 450+ on any truck then you would be getting close but it seems your having trouble getting the 2 or 3 you have out to do that. I have a Van Aaken program that will outperform any program you have but I don't talk about it because it isn't available to anyone else. You need to quit using the same advertising company that Banks uses and start putting that money into R and D and let your product sell itself.

Got Juice?
02-14-2004, 04:10 AM
Yup, Van Aaken makes some cool gear.

king d
02-14-2004, 11:02 AM
i havent been to the dyno yet but speed in mph is related to hp and in my case the 215 had a few less mphs out the end of the 1/4,what does it prove?maybe nothing.dynoing next weekend with the extreme,number to beat....455 with the quad..il keep you posted...jess

Mackin
02-14-2004, 11:51 AM
i havent been to the dyno yet but speed in mph is related to hp and in my case the 215 had a few less mphs out the end of the 1/4,what does it prove?maybe nothing.dynoing next weekend with the extreme,number to beat....455 with the quad..il keep you posted...jess

What are you doing today ?? Why wait ?? Why put of till tomorrow what can be accomplished today !!!!!

Mac http://www.dieselplace.com/forum/smileys/Approve.gif

blackjet
02-14-2004, 01:18 PM
Hey Mike L. this one is for you the truck didn run pretty good when that stuff was together. But did you see me say stock tranny. That is why it wasn't that high. But i feel that the quad is better. but that's me. I would love to have that program back so I could dyno it, to see what it had with a tranny that would hold. But I don't now. Bring some of these trucks to the big shows and let us see them. But before I got my quad I called dennis perry and asked him to call Steve and ask him if I could get this tune he was working on. He said he would not sell it unless you had a beefed up tranny, I did have one then he stilll would not let it go. So I called Quad had a 215 the next morning. i'm not doogging their product cause it did run good, but let's see some trucks this year with this product out and about.

Morse
02-14-2004, 02:07 PM
I'm sure the tracks are closed up north, though I would love to see some more track numbers with the tts extreme program before I choose between the present big two.. Who has the good deals on the tts?? Any price info.. I lowered my truck back down, and I have the tranny.... I guess I could be a guinnee pig and quit asking the questions.. I just don't want to spend the money and buy the "slower" product..

sdaver
02-14-2004, 04:09 PM
I made more with the first version of the extreme than I did with the quad with no rattle or pilot injection noise..........453 vs 441 with the quad. There were some fuel issues that have been resolved. My dealings w/ Steve have been a very good experience.

Mike L.
02-14-2004, 09:44 PM
#'s on a dyno mean squat. Tell me your monster #'s on the dyno with a bad injector and then run the quarter mile. 500 + horsepower on a dyno with a bad injector will put down some fast times. RUN IT and show what you got. There are so many variables and programs for the dyno that i no longer believe them. I only believe quarter mile times.


mtomac, xxxxxxxxxxx , at least puts down the times. As far as the rest of the horsepower freaks, run it and then talk smack. i really hated to say something good about tomac.


mikeEdited by: Mackin

Got Juice?
02-14-2004, 10:25 PM
Ouch!


War Room is in another section guys


Thanks


J

Mackin
02-14-2004, 10:43 PM
#'s on a dyno mean squat. Tell me your monster #'s on the dyno with a bad injector and then run the quarter mile. 500 + horsepower on a dyno with a bad injector will put down some fast times. RUN IT and show what you got. There are so many variables and programs for the dyno that i no longer believe them. I only believe quarter mile times.


mtomac, at least puts down the times. As far as the rest of the horsepower freaks, run it and then talk smack. i really hated to say something good about tomac.


mike





So I guess the N CA Dyno meet is canceled ?? If the ECM Extreme puts in a good showing above "other" tuners will the hooting and hollering and chest beating be "Dyno numbers mean squat ,see you at the track "??





Mac http://www.dieselplace.com/forum/smileys/Shocked.gifEdited by: Mackin

Diesel Power
02-15-2004, 12:52 AM
while we do see a variety of results from dyno's, its just a tool like anything else. same truck, same day, same dyno- while the #'s themselves may not be set in stone i believe the difference, as far as which ones comes out higher, will be. that being said there seems to be some variation in trucks with respect to which tuner runs best. I will be rolling everything i can given time constraints friday. i'd like to roll the 215 again but it depends on if it arrives back from quad before i leave for LA on thursday afternoon. i'd even roll a big va box if i had one as i'm always curious but it isn't in my arsenal.


Nick

CPMac
02-15-2004, 11:14 AM
Mike L since your to xxxxxx to remember what I have already told you I'll say it again. When I ran the times listed in my sig I had around 500 hp. Since then I have upped the hp and dyno'd 592 but the tracks have been closed so your just going to have to wait. But since your so pumped up on #'s what are yours? Edited by: Mackin

Bronco
02-15-2004, 11:25 AM
Removed by Bronco


It was funny, trust me!Edited by: Bronco

Mike L.
02-15-2004, 09:40 PM
CPMac


I run a tow program (80hp). I love it. I will bring my truck around slow, always did that with my hotrods. I will not make statements like 500 hp with a bad injector and a 13.3 time. I doubt if you will go any faster with your almost 600hp. I'm sure you have tried and will not tell us how it worked.http://www.dieselplace.com/forum/smileys/HiHi.gif Remember, i did not say my truck was fast, i said i would have the Extreme program. You are the one that said your truck is fast with your b/s signature. Don't you think it's time to change it to 600hp? Love to see the time slip.


your friend mike


There is always my dyno day CPMac; bring your truck, make a wager(i say you don't come within 100hp of your calims and i will back it with money). It could be worth your while, or you could lose big.

GMC-2002-Dmax
02-15-2004, 09:54 PM
while we do see a variety of results from dyno's, its just a tool like anything else. same truck, same day, same dyno- while the #'s themselves may not be set in stone i believe the difference, as far as which ones comes out higher, will be. that being said there seems to be some variation in trucks with respect to which tuner runs best. I will be rolling everything i can given time constraints friday. i'd like to roll the 215 again but it depends on if it arrives back from quad before i leave for LA on thursday afternoon.


i'd even roll a big va box if i had one as i'm always curious but it isn't in my arsenal.


Nick





Funny you mention that http://www.dieselplace.com/forum/smileys/HiHi.gif, NICK.


Somebody else wanted to know about a VA Smart "E" box.


Maybe it could make it to the Gold Coast......http://www.dieselplace.com/forum/smileys/Wink.gif, in time.


Let me see what I can do.........you listening TRIPPIN ???????


I need a stock tuned ECM to compare what is what, I have my dyno runs on an all VA Stack.....IIRC it was over 450 RWHP........#2 only....stock Tranny.


If you guys need it I can see about getting it there.........


If I get it back in time.


Thttp://www.dieselplace.com/forum/smileys/Big Smile.gifNY

Trippin
02-15-2004, 11:13 PM
http://www.dieselplace.com/forum/smileys/Embarrased.gif

CPMac
02-15-2004, 11:26 PM
CPMac


I run a tow program (80hp). I love it. I will bring my truck around slow, always did that with my hotrods. I will not make statements like 500 hp with a bad injector and a 13.3 time. I doubt if you will go any faster with your almost 600hp. I'm sure you have tried and will not tell us how it worked.http://www.dieselplace.com/forum/smileys/HiHi.gif Remember, i did not say my truck was fast, i said i would have the Extreme program. You are the one that said your truck is fast with your b/s signature. Don't you think it's time to change it to 600hp? Love to see the time slip.


your friend mike


There is always my dyno day CPMac; bring your truck, make a wager(i say you don't come within 100hp of your calims and i will back it with money). It could be worth your while, or you could lose big. Mike it's fine if you doubt my extra hp will go faster but you really shouldn't call me a liar about trying higher hp setup at the track because I haven't since the tracks are closed. Also your the only one that said my truck was fast (thanks) because all I ever said was what time it run (in front of several at a DHRA event). My truck had a little accident and now only has 3 wheels (missing the left front) but if you really want to put some money up (at least $5k) then I will be happy to take that wager and I would even sweeten it up for you by making the wager based on the 592 number or higher not just within 100 of it. Now put up or shut up.

Mike L.
02-16-2004, 12:00 AM
CPMac


I will put up 10K in an escrow account if you will. Bet your truck runs even faster on three wheels, seems you keep gaining horsepower the more things you lose.

CPMac
02-16-2004, 12:47 AM
What kind of rules do you need to try and protect yourself? Do I get a fair dyno pull? If so where do I send the money?


p.s. I did get the injector fixed.Edited by: CPMac

Quadzilla
02-16-2004, 02:33 AM
CPMac


I will put up 10K in an escrow account if you will. Bet your truck runs even faster on three wheels, seems you keep gaining horsepower the more things you lose.








Can I play? Or am I not invited? I bet I could buy a lot of treestands with $10k!!!!!

BMDMAX
02-16-2004, 03:24 PM
I just want to know who is going to crush one of the aluminum heads against their forehead at this dyno event first? http://www.dieselplace.com/forum/smileys/Clown.gif

Micheal Tomac
02-16-2004, 03:38 PM
Can I get in on the fun too? I will dragrace or truckpull but I stay away from dynos now since I broke the last one I was onhttp://www.dieselplace.com/forum/smileys/Evil Smile.gif Edited by: mtomac

Diesel Power
02-16-2004, 03:40 PM
Brandon,


I stopped crushing things on my head long ago...hopefully my dmaxes followes my lead http://www.dieselplace.com/forum/smileys/Clap.gif

dmaxalliTech
02-16-2004, 03:41 PM
Dyno no's dont mean chit to most of us. It does nothing but give bragging rights. You wanna talk big, put some time slips up. I dont care if you make 800 hp, yeah, you did it. But when your 800 hp only runs 13's, so what? Put what ever you want on the street. What sells, the numbers or the quality of the product? Since braggin rights wont get me anywhere, I choose the feel of the product, I went for a ride with sdaver with his scaled back extreme program and it was the smoothest program I have ever seen, no smoke, no noise, nothing. Just the smoothest transition of power I have ever seen. Yes, others make big power, but you gain some noise, smoke, or other sometimes unwanted side effect. I always thought that Edge made a killer product till I seen what the TTS would do. Not trying to sell anybodies products, just relaying my observations. http://www.dieselplace.com/forum/smileys/Embarrased.gif

CPMac
02-16-2004, 07:58 PM
Edited by: CPMac

JRmac
02-16-2004, 08:12 PM
Mikey EL:


10k wager?........YOU ARE THE MAN!!!http://www.dieselplace.com/forum/smileys/Clap.gif Is this just for CPMac or anyone over 600rwhp?


Just wondering why you think 600+ rwhp is not posible?..........or do you?


I know of several at or above......................Are you just wanting to see it to believe,.................or steal idea's?http://www.dieselplace.com/forum/smileys/Embarrased.gif


My lips are sealed!!!...............& my HOOD is CLOSED!!!http://www.dieselplace.com/forum/smileys/Big Smile.gif





Hey CPMac (aka TRIPOD) my boy has a SKATE-BOARD you can use under the left front to roll it on the dyno & collect your prize.http://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifhttp://www.dieselplace.com/forum/smileys/HiHi.gifEdited by: JRmac

sdaver
02-16-2004, 09:11 PM
CPMac


I will put up 10K in an escrow account if you will. Bet your truck runs even faster on three wheels, seems you keep gaining horsepower the more things you lose.





*


Can I play? Or am I not*invited? I bet I could buy a lot of treestands with*$10k!!!!!*

or you could make lots of
Carrot Salad


This carrot salad is easy to make and delicious. The dressing is low in fat, but still bursting with flavor.

Serving: 6
Prep Time: 15 minutes minutes
Cook Time: 13 minutes
Total Time: 20 minutes





1 small can (8 ounces) pineapple tidbits packed in juice
¼ cup reduced-fat mayonnaise
1 package (8 ounces) already-shredded carrots
1/3 cup raisins
¼ cup already-chopped walnuts





1. Drain off ¼ cup of the juice from the pineapple into a 2-quart or larger serving bowl. Drain off any remaining juice and reserve for another use.

2. Stir in the mayonnaise to blend well, then add the drained pineapple, carrots, raisins, and walnuts.

3. Toss gently but thoroughly to coat with the dressing and serve at once or cover and refrigerate until ready to use.


http://www.dieselplace.com/forum/smileys/HiHi.gif http://www.dieselplace.com/forum/smileys/HiHi.gif http://www.dieselplace.com/forum/smileys/HiHi.gif Edited by: sdaver

BIG DIPPER
02-16-2004, 09:17 PM
not as funny as the resident post whore thing.....but damn close.

Diesel Power
02-16-2004, 10:03 PM
BD - not sure i agree with you... i think he topped ithttp://www.dieselplace.com/forum/smileys/Clap.gif carrot salad! LMAOEdited by: Diesel Power

Mackin
02-16-2004, 10:04 PM
Prep Time: 15 minutes minutes
Cook Time: 13 minutes
Total Time: 20 minutes





It's no wonder we can't get straight consistant HP numbers ....No Basic math skills ....


1+1=3





Mac http://www.dieselplace.com/forum/smileys/HiHi.gifEdited by: Mackin

sdaver
02-16-2004, 10:14 PM
we are working on our timer kit...........not released yet

dmaxalliTech
02-16-2004, 10:16 PM
we are working on our timer kit...........not released yet Its in development stages at this time. Those that we have released are inaccurate depending on the air pressure outside. Currently being revised to cater to everybody's watch

BIG DIPPER
02-16-2004, 10:17 PM
we are working on our timer kit...........not released yet


...oh stop......2 in 1 night


any ideas on the board you will use?Edited by: BIG DIPPER

sdaver
02-16-2004, 10:21 PM
race logic/bullydog/Edited by: Mackin

geno
02-16-2004, 10:52 PM
Where is this high dollar event gonna take place and when. Ill bring the beer, Dave you bring the carrotzilla, Peenut bring stickers. Mac you bring Hoot an Dummax so me an nut can pick on them.http://www.dieselplace.com/forum/smileys/Evil Smile.gif Serious where an when.


Geno


I'd ask Kennedy to bring brauts but he to busy makin moneyhttp://www.dieselplace.com/forum/smileys/Cry.gif

geno
02-16-2004, 10:58 PM
Daver


you forgot the temp to cook athttp://www.dieselplace.com/forum/smileys/Ermm.gif


Hungry

Mackin
02-16-2004, 11:04 PM
Remember boys play nice ..............


Cause when you http://www.educationalmedia.com/Merchant2/productimages/Push-%26-Shove-Vid.gif





And out comes the Lock ....


Don't


Cry (http://pbskids.org/lions/words/cry.html)


Censorship ....


Nothing is being added here but personal worthless gain nothing agenda ....


It's about closing time ....


Edited by: Mackin

heartbeatcanada
02-16-2004, 11:20 PM
Muncie sounds allright. Lots of diesel hungry guys to witness. Whats everybody say.http://www.dieselplace.com/forum/smileys/Big Smile.gif

DMAX2DAMAX
02-16-2004, 11:21 PM
Remember boys play nice ..............


Cause when you http://www.educationalmedia.com/Merchant2/productimages/Push-%26-Shove-Vid.gif





And out comes the Lock ....


Don't


http://pbskids.org/lions/words/images/cry.gif


Censorship ....


Nothing is being added here but personal worthless gain nothing agenda ....


It's about closing time ....








Just so I get my personal worthless gain nothing agenda item in, it sure is funny you should say this after two posts in a row from "all them names" http://www.dieselplace.com/forum/smileys/HiHi.gif


Perhaps he took a lesson from Isurvivednothing and forgot what forum he was in.

geno
02-16-2004, 11:28 PM
Mack


Ill be good, wait till they set a date and placehttp://www.dieselplace.com/forum/smileys/Big Smile.gif


Geno

DMAX2DAMAX
02-16-2004, 11:31 PM
Mack


Ill be good, wait till they set a date and placehttp://www.dieselplace.com/forum/smileys/Big Smile.gif


Geno





Mac,


Keep it open, history could be being made. http://www.dieselplace.com/forum/smileys/HiHi.gif

Burner
02-16-2004, 11:55 PM
ROFLMAO!


Burner-----------> http://www.dieselplace.com/forum/smileys/Clap.gif

GMC-2002-Dmax
02-17-2004, 12:26 AM
I hate to be the bad guy http://www.dieselplace.com/forum/smileys/Confused.gif..........too often threads are being taken off topic lately.http://www.dieselplace.com/forum/smileys/Ermm.gif


As you know I like to have fun as much as the next guy does....http://dieselplace.com/forum/smileys/Big%20Smile.gif....just trying to keep things straight up in these threads.


We have the War Room so we can play around and bust some friendly cajones.http://www.dieselplace.com/forum/smileys/Evil Smile.gif


So please......try to stick to what the thread is about, I know they can easily take a different direction....let's see if we can leave the playing for the WAR ROOM. http://www.dieselplace.com/forum/smileys/Big Smile.gif


Thanks in advance to everyone.





Thttp://www.dieselplace.com/forum/smileys/Clown.gifNY

king d
02-17-2004, 09:44 AM
we are working on our timer kit...........not released yet thats some funny chithttp://www.dieselplace.com/forum/smileys/Clap.gif http://www.dieselplace.com/forum/smileys/Clap.gif

JRmac
02-17-2004, 07:28 PM
Mikey EL:


What happend?http://www.dieselplace.com/forum/smileys/Confused.gif


I know waiting on STV for more info.

SmokinMax
02-17-2004, 08:26 PM
king d where u dynoing at next weekend ......? just curious ......cp mac u should put me in on the bet i might get close to your numbers soon dont u think? ......talk to u later ......

king d
02-18-2004, 01:41 PM
dynoing in jacksonville nc on the 21st at waynes dyno..dyno day 10 or something