|
DURAMAXED 11-05-2005, 10:38 PM I'm just wondering what's out there for my lbz right now. Exhaust, intake, programmers. I need something right now. If there is exhaust is there a cat delete option and if so is it safe. or is their propane I can run or and intake from volant or any other quality company??? Please let there be something. I'm used to my 03 with 400 hp and 780 tq. and exhaust tone from the heavens. Chevyduty84 11-06-2005, 01:48 AM As for an intake LBZ already has cool air intake on them. Exhaust wise i dunno mbrp might have a kit not real sure but u can always get some 3.5 inch pipe chop the muffler and cat and run that. Tuner wise nothin other than the ppe duramaximizer. Edge says hopefully early 06 with tuners. :ro) Max Power 11-06-2005, 02:06 AM Exhaust, all will work as long as you get rid of the Cat. For power I think PPE is the only one with anything available. With 350hp to start with, if their box is good for 100hp you should be almost 400hp at the rear wheels. Propane is always an option. 05LLY2500HD 11-06-2005, 10:10 PM http://www.pacificp.com/ duramaximizer 11-08-2005, 12:44 PM ppe says an additional 150 hp so that ought to put you at 450 rwhp pretty easy. omg 500rwhp is going to be a cake walk on the lbz. ratlover 11-08-2005, 01:02 PM Is this thier flywheel rated HP? I duno but I just cant see a pressure box giving us 150HP to the rears:think: duramaximizer 11-08-2005, 05:03 PM no it is at the motor. Application: 2006 LLY & LBZ 6.6L Duramax Diesel trucks HP/Torque: Additional 150HP and 250Ft.-lbs of Torque max at flywheel. Features: Infinite Adjustability on the fly, Billet control knob, better towing capabilities, increase gas mileage by 2-3 miles per gallon, and much more... Installation: Plug-n-play billet module with factory wiring and harnesses. 2-year warranty. so i was figuring 150+360=510 - 60 for the tranny gets you at 450 inless i suck at math. Aron420 11-10-2005, 01:40 AM Did you guys hear that to use the new duramaxamizer you have to do the shim mod and ppe supplies the parts because apperently the LBZ is a P1093 machine, at least thats what the guy from ppe said when i called and asked adout the chip. he also said the downloader will be avalable in about 2 months. unk577 11-11-2005, 11:57 AM PPE list the Duramaximizer for the 5 speed Allison or the 6 speed manual. What about the 6 speed Allison??? marksrt43 11-12-2005, 01:42 AM Ya, whats up with that, I don't think the 5 speed Allison is available in the pickups for 2006? I could be wrong though...... Unit453 11-12-2005, 01:45 AM Whats out there> Lots of unburned fuel...... kdawg62 11-12-2005, 08:32 PM Bullydog Downloader for the 06 Duramax Part# 43568 will be shipped to dealers on Nov. 21. Pretty sure it will do both the 310 LLY and LBZ motors. It will not be incorporated into the triple dog downloader until later. Have put a few beta testers on some trucks at the shop and they run really well. The tuners load in about 60 seconds, it is incredibly fast compared to the old stuff. sweetdiesel 11-23-2005, 02:12 PM when will the edge be out i would like the backup cam and does banks have the exaust? | ||