TA Dave
10-13-2005, 08:14 PM
I just installed my H2's on my 06, do I need to just take the rubber plugs out or trim the 4 tabs as well?
I have the aluminum factory wheels and caps.
Thanks!
I have the aluminum factory wheels and caps.
Thanks!
|
: H2 wheels with Chevy center caps BlueOx03 10-13-2005, 08:15 PM just cut the tabs off and put them on. TA Dave 10-13-2005, 08:19 PM What works best to cut them off? BlueOx03 10-13-2005, 08:20 PM a dremel.... BIG DIPPER 10-13-2005, 08:20 PM Angle grinder would work fine, but I have them and didn't have to cut the tabs off. The GMC caps fit fine from the PYO wheels. TA Dave 10-13-2005, 08:45 PM Excellent, got 'em on. Thanks! Reineke 10-14-2005, 03:13 PM Didn't waste any time putting them on, did yah? :D TA Dave 10-16-2005, 11:58 AM ):h I had to get rid of the little factory doughnuts... ;) They look great, thanks for your help! suburbandiesel1 10-30-2005, 12:36 PM I am also putting H2 wheels on my Suburban. The 2002 center caps do not fit the H2 wheel. Do I have to trim the cap about 1/2" to make it fit into the H2 opening? I wish I could get longet lugs so I didn't have to trim at all. It seems the center cap is about 1/8" to wide. Thanks TheBac 10-30-2005, 12:43 PM SD1 -- you may have the caps from the steel wheels? If so, they don't fit the H2's without trimming. IIRC, you had to trim the base of the cap about 1/8". I know someone posted a LONG time ago about doing this, but I couldn't find it. The caps from the aluminum wheels should fit with no problem. The only thing people sometimes have to do is trim the little "feet" off those style centers. | ||