95 chevy won't start anymore [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: 95 chevy won't start anymore


steve63
10-11-2005, 05:59 PM
ok boys...help me out please.....95 chevy with 6.5 turbo diesel.. if I ran it higher than 2500 rpm on the high way my service engine light would come on and it would seem I would be reduced to half the power.. could shut it off while coasting and restart,engine light would stay off till rpm was over 2500 again...after service engine soon light comes on a noticable loss of power.but would run smooth but also at a high rpm at an idle..before that engine was , what I would call "missing"....ran it home and shut it off.tried restarting few seconds later..won't start....today now cold ,tried to start again, and sputtered afew times but won't run....fuel pump on frame rail in working, bleader at front of engine drains when valve is opened... really don't know where to even start now .....engine was installed by myself 30,000 miles ago and up to this day has run fine.......... really need thr truck....bought a boost guage from you guys and also need to know the best location to grab the boost reading...providing I can get this running again.....please help,Steve

thefermanator
10-11-2005, 06:05 PM
Update your sig and check the FAQ section under the 6.5 topic. Is your FSD remote mounted?

cretan
10-11-2005, 08:20 PM
Since your truck is a 95 model,you can get the codes off your computer very easily.This should help you.Here is the link http://www.kennedydiesel.com/ (http://www.kennedydiesel.com/)Top right of page click on tech tips,then 6.2-6.5 tips and finally read codes.

Texas Diesel Guy
10-11-2005, 10:09 PM
Pump problems I'll bet

steve63
10-12-2005, 05:52 PM
ok...heres the codes as follows 13,18,35,54 and my FSD is not remote mounted....any help that you can give will be well appreciated.....Thanks

thefermanator
10-12-2005, 06:19 PM
Sounds like a pump problem. All of those codes have to do with the pump. I would check all of the connections on the IP and make sure they are clean and tight. I am not real familar with the DS-4 so hopefully someone who is will chime in.