denalidmax
10-06-2005, 05:07 PM
does anyone know if the fabtech steeringn components kit can be used on a truck without a fabtech lift? because my name is kevin and IM STUPID!!!!!!:cool2:
|
lbz492 10-06-2005, 05:16 PM yes it can because i have it on my truck and it just has t-bar keys buildingup 10-06-2005, 07:29 PM how much do the fabtech steering components run roughly?? dmaxlover 10-06-2005, 07:39 PM Any links or pics of idler and pitman arms? lbz492 10-06-2005, 08:18 PM how much do the fabtech steering components run roughly?? for the whole kit it was around 500 with tie rods idler arm pitman are and stabilser lbz492 10-06-2005, 08:20 PM http://dieselplace.com/forum/showthread.php?t=40934 there are some pic of the tie rods here GMC-2002-Dmax 10-06-2005, 08:26 PM http://www.dieselplace.com/forum/showthread.php?t=44508 . . . . . . jaa 10-06-2005, 10:51 PM I recently heard that they were holding back on the pitman /idlers due to casting problems? I replaced my stock ones with moog and cognito braces. I did use fabtechs tie rod system. So far no problems. Sure does steer better with the new arms and braces! Donald McMullin 10-07-2005, 11:57 AM Does anyone know if the Fabtech tie rod pivot point is the same height from the spindle arm as the stock tie rod. The reason I am asking is if the Fabtech tie rod raises the pivot point in relation to the spindle arm, the bump steer might be improved when the static height is higher than the stock height (lifted front end). If anyone has a Fabtech tie rod end, could you measure the height difference between the aftermarket tie rod and the stock rod?? Any help regarding this question will be appreciated. Deep Enough Donald McMullin Gilbert, Arizona WhippledHD 10-07-2005, 12:55 PM I like the Cognito sterring upgrades better than the Fabtech parts. I ran them in conjuction with tie rod sleeves on the lst truck on a 6" RCD I had zero sterring problems after that. If nothing else Justin at Cognito has a better company than Fabtech and he stands behind his stuff 100%, every time I deal with Fabtech I come away dissappointed. I would start with Cognito Motorsports and go from there....Fabtech would be a last resort. Just my $.02, Chris denalidmax 10-11-2005, 04:02 PM can someone tell me the web address for cognito or a phone number for them NorCal 2500HD 10-11-2005, 05:06 PM http://www.cognitomotorsports.com/ denalidmax 10-13-2005, 12:26 AM thank you...im planning on using there kit | ||