Sorry if this has been done but I need pics of wheels on trucks without lifts. I want new rims and need to know what fits stock suspension and looks good.
Thanks. :beerchug:

Permo1

I just put eagle 114's 18x9.5 on my truck with 285/60r18 and they don't rub at all. I did take my torsion bars up four turns. If you click on my truck pics in my sig you can see what it looks like.

What back spacing do they have?

The 18x9.5 have 6" of backspacing

17x9" Moto Metal 951's with 265-70-17" BFG's. Slight rub on the front air dam when backing up and turning only. Nothing a little mod to the air dam won't cure.

http://dieselplace.com/forum/attachment.php?attachmentid=8968&d=1127411275

Here's mine with Eagle Alloy Series 187 16x8 with 4.5" BS and -5mm offset. Only minor trimming needed and front mudflaps removed. I also had the torsion bars cranked to raise the front about an inch. The front is 1" lower than the rear.They only have minor rubbing while backing at almost full lock. I also have 285.75-16s on them.

http://chevytruckworld.tenmagazines.com/gallery/ob1jr/179517.jpg
http://chevytruckworld.tenmagazines.com/gallery/ob1jr/181206.jpg
http://chevytruckworld.tenmagazines.com/gallery/ob1jr/179519.jpg

Here's mine. Weld racing Sidewinder 258 16x8"
4.625" back space and 3200# load rating

http://www.dieselplace.com/forum/attachment.php?attachmentid=3046&d=1111294791

http://www.dieselplace.com/forum/attachment.php?attachmentid=6191&d=1120866875

u think its pissible to run 16x10 on my 2500 with a leveling kit

I think there are members that have. You would probably have more cutting to do. I guess it would depend on the backspacing. I'm pretty sure that 285s are around 11 inches wide so.......I suppose it is possible.

i don't have any pic but i got 20x10 weld velocity with 4.5 backspace with 285-55-20 they came out to be 32.5x11.5 they are big tires with just the t-bar cranked but they fit with alittle timming on the front air dam.

Something like this PERM?
Pic 1..my truck with the 285/75R16 ...no lift
Pic 2..my truck the day it came off the transporter

here's mine, they were actually on the truck when I bought it. they're MB Motoring Overdrives 16x8's, don't know the backspacing, but I think they are nice rims.

partsguy,
are those stock wheels?

partsguy,
are those stock wheels?
Picture 1 - no- those are AR-23 american racing wheels
Picture 2 -yes- stock chrome wheels with the stock tires
:)

They all look nice, I just dont know what size rim to go with..

Just got a set of H2's from ebay for $150 +$85 shipping. Put a LT265/70/17 on the front for comparison against stock and to check clearance. I have no interest in raising the truck, just filling out the wheel wells.

I love those rims "B C'' ! Is there any lift at all on your truck?

I just put H2's with 265/70/17's and they fit with no issues at all.

H2's 315/70-17's TB's cranked ONLY. Zip ties hold stuff out of the way. Still rub's but not to bad.
http://dieselplace.com/forum/attachment.php?attachmentid=5132&d=1118037049

http://dieselplace.com/forum/attachment.php?attachmentid=1258&d=1105930317

here are my H2's w/ 33's and no lift.

http://joesdrums.com/bobo/newtires/truckntire2.JPG

Wheels are in my sig.
http://img.photobucket.com/albums/v213/snuffysmith/Trucks/10-09-05001.jpg

PERM01, is that a GN in you avatar?
John

PERM01, is that a GN in you avatar?
John

Sure looks like one to me ;)

NIIICE LOOK snuffysmith. What kine mods u do to make that combo roll. How's ride. How's tow compared to stock. Aloha

Here are some pics of my truck Before and after tire and rims with my son for height comparison. Wheels are Helo Maxx 8 with Bridgestone 285/75/R16 only a few turns on the T/B

http://dieselplace.com/forum/attachment.php?attachmentid=5743&d=1119882127
http://dieselplace.com/forum/attachment.php?attachmentid=5742&d=1119882127Heres mine with 285's and just leveled the front, no lifting just tweeking.I couldnt tell ya the exact model of AR wheel on my truck, sorry.

H2's 315/70-17's TB's cranked ONLY. Zip ties hold stuff out of the way. Still rub's but not to bad.
http://dieselplace.com/forum/attachment.php?attachmentid=5132&d=1118037049

http://dieselplace.com/forum/attachment.php?attachmentid=1258&d=1105930317

fantastic!...that looks so bad ass, how the f did you fit those in there without a lift?

and right a detailed explaination because im about to do the same thing...tomorrow :ro)

adraco28
Sent you a PM.
Not very detailed.
Do a search for "H2's" and read, read, read...
Then decide if you still want to do this.

NIIICE LOOK snuffysmith. What kine mods u do to make that combo roll. How's ride. How's tow compared to stock. Aloha

cranked up the t-bars a lil and slapped on the rims and tires. i'm riding on stock suspension now, i had the 3" lift spindles on and 2" blocks in the rear, but got tired of that so i took them off and went and got me some 20's. it rides just fine. handles the road better than stock with the wider tires.:cool:

Well Mine Are 16x8 Ion 158, With Yokohama 285/75/16 Geolander Ii. Got About 10k On Them Now. They Are Quite On The Road And And Hell In Mud ! If Your Not Inside You Had Better Hide.it Throws It Every Where.

Arm