tmboughton5
09-23-2005, 04:46 PM
How to undo the edge with attitude when I need to take truck in to dealer.
|
briano 09-23-2005, 04:56 PM just reverse the install procedure providing you were the one that installed it.. the Edge itself unplugs from the harness very easily under the hood on the drivers side. Where is your Attitude mounted? if its not a console mount that should just be a few screws done. tmboughton5 09-23-2005, 05:12 PM Didn't install it myself. Seems easy enough though. Anywhere I can run the cable so it doesn't show coming through by the door? Also, do you reccomend that I remove it when I take it in for an oil change? briano 09-23-2005, 05:19 PM oil change is probably no big deal, but if its going in for work/repair then yes. the cable is connected to the Attitude and you may have an extension on yours, but you can just pull it through. You may also have an EGT probe in your manifold..make sure you check that as well. Kappa9012 09-23-2005, 06:23 PM your cable is going in through the door??? please tell me i'm reading that wrong. Wolford 09-23-2005, 07:00 PM nope mine is too tmboughton5 09-23-2005, 07:05 PM nope comes out from the engine compartment by the door pillar and in. | ||