|
CanadianRigger 09-15-2005, 06:32 PM Here's the high idle install i just finished on the 94 Blazer with lots of detailed close up pics for anyone thats been hesitant about doing this modification. Sorry guys (& Gals) but i'm just linking them to here as its about time i started putting more stuff on my own site, thats why i got it! HIGH IDLE INSTALL (http://www.65td.com/forum/forum_posts.asp?TID=16&PN=1&TPN=1) boisebiker 09-15-2005, 06:38 PM Dude, you rock! You couldn't make it any easier than that, except tell us where to get that little connector and what the PN is. Thanks 94blazer6.5 09-15-2005, 08:21 PM Great Job CR!!!!!:ro) Looks like I'll be doing it as well. Agian thanks for the detailed instructions. BTW How do you like that Blazer so far? 94' Blazers was the best year ever made IMO!!!!:lol: CanadianRigger 09-15-2005, 08:47 PM I can't find any fault with this truck besides regular R&M that needed slight attention, it was lady driven from what i've seen and know. Maintanence records in the manual from what i glanced at. 208,000 km's since 94, looks like a new IP in 01 according to the stamp on it but i will verify with TDG later. Only 20,000 km's i think since the new IP. This baby is sweet and will be a terrific project truck, as you can tell from the sig, i've already begun with the mods. (just need to convince the wife these things need to be done, lol) BTW, i weighed the truck, it tipped the scales at 6100 lbs with a 1/2 load of fuel. One more thing to add, did you guys check out the OFF TOPIC forum, there's a must see video in there.....lol guybb3 09-16-2005, 06:31 AM One more thing to add, did you guys check out the OFF TOPIC forum, there's a must see video in there.....lol Which one CR?????????? 94blazer6.5 09-16-2005, 09:07 AM BTW, i weighed the truck, it tipped the scales at 6100 lbs with a 1/2 load of fuel. I know it kind'a hard to believe these little (not really little) things weight so much:eek: . Last time I weighed my full of camping stuff, and full tank I think it way around 6300lbs or so. I still avg about 19.5 mpg highway however loaded or empty:ro). If and when you get time I'd like to know what kind of MPG your getting. When you use the high idle what's the idle at? about 1050 -1100 rpms? dmitch 09-16-2005, 01:36 PM CR - Do all OBDI use the A6 connector? CanadianRigger 09-16-2005, 02:17 PM When you use the high idle what's the idle at? about 1050 -1100 rpms? Dash gauge says about 1225 rpm but i think its a little high. CR - Do all OBDI use the A6 connector? Good question, i don't know the answer for 100% but would guess at yes on the Chevy's. Which one CR?????????? There is only 1, forgot to mention its on my site... | ||