When I bought my Summit Racing exhaust system I got the biggest tip they offered, 5X18". It started looking a little small a while back, so I went to looking for a bigger one. After looking high and low on the internet and I found a huge stainless steel 6"X22" tip with a 4" inlet. I found this tip at ITP Diesel on a Sunday and went ahead and ordered it. I received conformation of the order and a back order notice. Within hours I received notice that the tip was shipped straight from the manufacturer. i thought that was good. A week later I didn't have it and I'm bad about waiting so I called ITP. I got the voice mail and left a message. A couple hours later I received a phone call from Dennis, the owner. I talked to Dennis for a while, I'm long winded. Anyway ITP is pretty much centered on the Powerstroke engines, so most of us have probably never heard of them. They also have an expanding line of products for the Duramax. I didn't really look at all he carries or pricing, but i can tell you that his customer service is five stars in my book. dennis seems to be comparable to John Kennedy in the Ford world. ITP looks to be another good vendor in the ever growing word of diesel performance with some familiar products and some different products, worth a look anyway.

I received the tip today and installed it, man it's huge! I love it. It has a good quality appearance to it and the fit is great. Really not much else to say there. The sound is a little different, lower than it was before, I like it. I took some pictures of my dirty truck with the dirty old tip and the new tip. Enjoy!

Ox

http://www.dieselplace.com/forum/uploads/C45_P1260037.jpg
The Summit 5X18 tip, keep in mind this thing is very dirty, it usually looks sweet.
http://www.dieselplace.com/forum/uploads/FB4_P1260040.jpg
The Summit 5X18 and ITP 5X22 side by side.
http://www.dieselplace.com/forum/uploads/5A4_P1260042.jpg
The BA tip installed...like those hemi guys say...sweet..

And here's a link to ITP Diesel (http://www.ITPdiesel.com)...later fellas...

I'll say it again....I like big T**S! http://www.dieselplace.com/forum/smileys/Big Smile.gif

Looks great Ox http://www.dieselplace.com/forum/smileys/Thumbs Up.gif

hope you don't mind, have summit exhaust also on 04 cc and was looking for a tip. ordered tonight. thanks for the info. steve

It's almost as big as your back tire.http://www.dieselplace.com/forum/smileys/Thumbs Up.gif

Today I ran into a problem I didn't anticipate, I was backing into my driveway and scooped up my wifes Alerohttp://www.dieselplace.com/forum/smileys/Clown.gif http://www.dieselplace.com/forum/smileys/Clown.gif OOOPS!! It took some work to get it out of there. Now all I need is one coming out the other side to even things out.

D5-you got em' on order yet?
It's only a matter of time my friend...

Ox

Yep,


I gotta to have a bigger pipe than you http://www.dieselplace.com/forum/smileys/Clown.gif

Yep,


I gotta to have a bigger pipe than you http://www.dieselplace.com/forum/smileys/Clown.gif





David


You're not going to put two of them on your truck, are you?http://www.dieselplace.com/forum/smileys/HiHi.gif


Thats it, I am now looking for a 7 inch tip.http://www.dieselplace.com/forum/smileys/Wink.gif

Mike, I already have a guy working on building me a pair of 10X32 inch tips out of billett aluminium so 7s would be a waste of time...

D5 I hear there are a lot of places in your area that will enlarge you pipe for the right price, but the question is is will it work??

Mike, I already have a guy working on building me a pair of 10X32 inch tips


Carefull you don't back up and scoop up something bigger http://dieselplace.com/forum/smileys/Pinch.gif


Watch where you going dude http://dieselplace.com/forum/smileys/HiHi.gif


peace

Bluox03, what is the coefficient for wind-drag on that thing?Huge dude.Looks good,i agree need to even it up with a pair.

Home Depot sells Stainless chimney sections http://www.dieselplace.com/forum/smileys/Wacko.gif



Edited by: hoot

I drove by Ox's house tonight, and there were a bunch of border-jumpers taking up residence in that thing...


Edited by: tysmith

There is an issue with scavenging gain and loss with tail pipe diameter. We are looking for the (Moan Effect). Too big, and she screems, too small, and she laughs. Just right, and you get the moan.http://www.dieselplace.com/forum/smileys/HiHi.gif


mike

I lost my son tonight ...anyone seen'em? http://www.dieselplace.com/forum/smileys/Big Smile.gif

Now for all you fanatics who think you have big pipes...
I hate to disappoint you, but here's a picture of me welding my aftermarket exhaust together.
http://www.dieselplace.com/forum/uploads/35Z_industry-pipe-work.jpg


Now where's that guy who's complaining it's hard to change a fuel filter on a Chevy.

Morning Members,

If you looking for bargains check this out:

We have a sale going on right now on T-409 stainless steel systems with 100% T-304 hangers and T-304 muffler including a 5 inch T-304 polished rolled edge tip at $489.99. The dual kits are $779.99 for those that like the look and sound of the duals !!!

We also have a sale on aluminized duals at $659.99.

Our distributors are aware of these prices and they or us will be glad to get your shipments processed ASAP. The sale prices are limited to on hand quantities.

Mark @ DPPI

OMGhttp://www.dieselplace.com/forum/smileys/Shocked.gif


That things huge, any problem finding homeless people camping in it??http://www.dieselplace.com/forum/smileys/HiHi.gif


I'm looking to lower the tone of my JK 4" exhaust, this may be the ticket.


Is the hanger holding the additional weight OK or did you add some support.

Yes, we do have the DPPI systems on sale like Mark said. There is an entire page on my site dedicated to the "Blowout Pricing" we have on these kits.


BTW...THANK YOU to Ox for the nice comments...we aim to please!Edited by: ITPDiesel

WJ's Performance offers an 8 inch tip....