Well here they are guys. I hope you can understand them. I am not a writer at all and have a very dificult time explaining myself on paper.
This is a large file. 8mb
GM 6.6L Racor Filter Installation Instructions (http://lubespecialist.com/racor/gmracor.PDF)

If a kit is ordered by the 30th you can get up to 6 replacement filters for $19 each.
GregEdited by: LanduytG

Good Job!


http://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gifhttp://www.dieselplace.com/forum/smileys/Clap.gif

Greg, I send you an email. That file is not 8 megs, its only 800 KB.



Edited by: Max Power

Superb job, but you left out step 18 in the instructions: DRIVE 300,000 MILES

Could you run the nictane filter and this filter and the oem filter?

Would it be too much resistance on fuel pressure?

I see that I for gothe first picture. I will be taking a picture of the fitting configuration later today and fix the PDF.

Very little restriction in the Cat and Racor. I have one customer that has been doing it without problems.

Greg

Greg, Any thoughts about those Swaglok fittings on the line ends that connect to the factory fuel line. I am interested in your kit but think I might feel safer using the Swagelok fittings than hose clamps. Can you provide Swagelok fittings on the lines at an additional cost ?


Mark

MArk
I am sure I can get the fittings form my Parker supplier. But with over 125 units out and allare done this why with out any problems what so ever. I have a hard time with taking a section of line out if you don't have to.

Greg

Greg...nice job on the instructions. Just a little curious on the wire splices under the fuse block. Does the Racor kit also require spices in the wiring vs. some kind of OEM plug assembly. I get a little nervous doing splices sometimes. Thanks!

Looks good. Yet another quality offering for more choice.





Jess

Well here they are guys. I hope you can understand them.
GM 6.6L Racor Filter Installation Instructions (http://lubespecialist.com/racor/gmracor.PDF)

Greg

Did these instructions get moved somewhere else? I can't get the link to work anymore. I know it did work a while ago but of course I didn't think enough to print them when the link worked http://www.dieselplace.com/forum/smileys/Confused.gif

NorthCoastDmax


Send me and email and I will send you the pdf.





Greg