Getting ready to do a new clutch in my dads 01 ZF6 I got a new slave cylinder/throwout bearing and a new single disc single mass flywheel coming from southbend. anything else i need to do or should be aware of before I do this? this is a bone stock rig and always will be so when I talk to SB clutch they said this would be the one they reccamend. thanks for the help.

It'll come with new flywheel bolts so you don't need anything else.

Hows the trans to get out? I have access to a lift and my tools.

.pdf file download in post #7

http://www.dieselplace.com/forum/showthread.php?t=350992

jc

Hey thanks I will Dl that and print it out.

I believe when I done mine it was a 55mm allen (hex) socket to take out the flywheel bolts and they are tight so you might need a cheater pipe i put in a dd valair and make sure you get it alined right and the alignment tool will come out easy