|
tacoma7583 09-02-2005, 08:45 PM I'm trying to prewire the switches that came with the trippin gauge mount. Since there are three terminals on each plug. What is the proper way to wire them. two are silver colored and one is gold colored. GMC-2002-Dmax 09-02-2005, 09:28 PM The Gold one is marked (+) ..........the other two are the open/closed circuit for the accessories...........Hook the wire from the 12v to one of the silver pins and the other silver pin goes to the accessory........I would guess the Gold is for the LED, Max Power would know how it works............I suck with wiring........... . . . Trippin 09-02-2005, 10:32 PM Gold to ground. 12 volts into silver. 12 volts out of the other silver to accessory. partsguy662 09-02-2005, 10:33 PM Gold to ground. 12 volts into silver. 12 volts out of the other silver to accessory. are you sure?? ):h Trippin 09-02-2005, 10:51 PM are you sure?? ):h No. :D | ||