|
: Strange problem with cat removal Pro Muffler 08-31-2005, 08:27 PM After putting on a 4" complete turbo-back system, there is a weird problem. The check engine light comes on and the truck seem to stall, or act like it's running out of fuel. Is this just caused by the EGR? Would installing the Finger Stick fix this stumbling problem? Or would I need the block-off plate as well? Thanks for any info! chp777 09-01-2005, 12:15 AM thats not weird you need a fingerstick do a search for finger stick and it will answer your question and problem and i would say do the blocker plate also briano 09-01-2005, 12:42 AM the finger stick only masks the check engine light, or code, from the new open exhaust. since you have much less backpressure your EGR has no idea whats going on and sends wierd signals and truck runs like crap. The blocker plate will solve that while still keeping it enabled. So, get teh blocker plate to solve the egr problem and the finger stick to hide the code. Fingers 09-01-2005, 10:34 AM Stick does not "hide" the code. It prevents it. Blocker plate is not needed, but can be added without problems. briano 09-01-2005, 12:00 PM thanks for clarifying! h8nopi 09-03-2005, 12:34 PM It's a low boost error probably (that's what I got). Do like they say stick it and block it.;) RichLockyer 09-03-2005, 02:28 PM Stick does not "hide" the code. It prevents it. Blocker plate is not needed, but can be added without problems. Any differences in the stick installation/operation on the '06? Seems it has a computer that's more of a hybrid LLY/LBZ, and it has the new air cleaner. Fingers 09-03-2005, 06:45 PM Any differences in the stick installation/operation on the '06? Seems it has a computer that's more of a hybrid LLY/LBZ, and it has the new air cleaner. I don't know if the stick will work on the '06, though the principal is the same. Guess I need to go look at one of these beasts. daully 09-04-2005, 11:06 AM where do i get a finger stick and/or block plate im puting a edge w/attitude and a mbrp exhaust in my 05 lly is there anything diferent cause im gonna put the edge in Fingers 09-04-2005, 12:35 PM look here http://dieselplace.com/forum/showthread.php?t=21428 isophase 09-05-2005, 01:49 PM I have an 05' and I did the Silverline 4" SS exhaust turbo back.. (removed the kitty) and I have not had any engine codes.. and the truck seems to run fine (knock on wood) Should I be thankful and not mess with anything or should I do this stuff your talking about? Fingers 09-05-2005, 02:25 PM If your happy, leave it alone. | ||