Friday night July 15th we're having the Clinton County Diesel truck pull again and we're having a 2.5, 2.6 and 3.0 classes. Diesel trucks only. Rules and payouts will be announced later.

Subscribed

Ryan, where will this be, the fair grounds?

Yep sure will. Come on out. Will be a good show.

OK we're doing a pre-register again this year. Let me know if you wanna pull. Name, class and phone number please.

If 2.5 isnt full yet put me down for a spot please. Justin Koger 765-301-0346 2.5 workstock thanks.

Sign me up for the 2.5 class please :)

Tim Tuttle
217-822-8985

Justin and Tim, Chase already signed you up!! Got ya down. Should be a good time again this year.

OK here's the rules and Payouts. IF you meet ITPA, COTPC or BOB rules thne you'll be ok but we will be teching trucks and if you don't meet the rules then you won't pull. Trucks in the money will be reteched after class.

$30 Hook fee non refundable if you don't meet tech.
Payouts are as follows

2.5 1st $1000, 2. $700, 3.$500 4.$300 5.$200 6.$150 7.$100 8.$50

2.6 & 3.0 1st $1200 2.$800 3.$500 4.$300 5.$200

Workstock/2.5 rules
Work Stock Class –
True 2.5” Inducer Bore NO CLIPPED WHEELS / NO BUSHINGS/ NO TAPERED COVERS
.200 MAX mwe Groove
No Hanging Weights (Ballast Permitted)
8000lb Maximum (With Driver)
26” Hitch Height
DOT Tires
No Dual pumps, no compressed gases or Power Adders of Any Kind
Diesel Fuel Only
Traction bars are allowed
Valid Registration and Proof of Insurance Required
Single Wheel Trucks Must Run Single Rear Tires, Factory Dual Rear Trucks are Permitted to Run Dual Rear Wheels

‎2.6 Class Rules.
Hot Street
2.6” Inducer Bore
Minimum 1/8" Protrusion Into Bore
Compressor Blades Must Be Perpendicular to the Shaft
.200 MAX mwe Groove
Hanging Weights are permitted within 60” from axle CL
8000lb max (With Driver)
Driveshaft loops, u-joint shields and bump stops required
Dual pumps are permitted
No compressed gases of any kind
No Water/Meth
26” Hitch Height
DOT Tires
Valid Registration and Proof of Insurance

‎3.0 class rules
Super Street -
3.0” Inducer Bore
Minimum 1/8" Protrusion Into Bore
Compressor Blades Must be Perpendicular to the Shaft
.250 MAX mwe Groove
Hanging Weights are permitted within 60” from axle CL
8000lb max (with driver)
Driveshaft loops, u-joint shields and bump stops required
Dual pumps are permitted
No compressed gases of any kind
Water Injection Permitted No methanol
26” Hitch Height
DOT Tires
Valid Registration and Proof of Insurance

Alright good deal! Thanks

BUmp again. classes are filling up.

Bumping it up again guys.

Address for the fair grounds:

1701 S. Jackson St.
Frankfort, IN 46041

Getting closer. Bumping it up again. More spots to fill.

Will you post a list of trucks that will be pulling, so people will know who they can expect to see?

Darren Hancock
2.6 class
217-671-3695

Classes have been changed to the following order: 3.0, 2.6 and then 2.5 is last class. So the 3.0 and 2.6 trucks can run both ITPA and our pull.

Darren Hancock
2.6 class
217-671-3695

Got ya down Darren. Thanks.

Will you post a list of trucks that will be pulling, so people will know who they can expect to see?

Jeff when it gets closer I'll try and post what i have.

Thanks

What time do we have to be there if we are only pulling 2.5?

Hope you guys have a good turn out like ya did last year. It was a hell of a 2.6 class over there. I got my ass handed to me, but it's still fun to pull with good running trucks like that.

Anyone have any videos?

Any one have the results?

ttt