Does anyone know who can do the install for me. Close by Southern California. I don't feel comfortable driling into the manifold.

Cid or McRat come to mind.....I live in Corona but dont have the Edge/***. Think Cid is close to you though.

LATER!

Thanks dude.
I'll try and find these guys.

Bodysurfer,
Do you know any shops in the corona area that does installs?

Socaldieseltech from here has a shop "West Coast Diesel Performance" but its in Lake Elsinore, CA. He does GREAT work. He put on my frontpipe and has worked on many other member's trucks.

I just called thembut they'reclosed tomorrow.
I'm itching to get that darn Edge installed.
so I can go and waste some fuel.

Lol

So you do understand my pain.

Plug it in and go have some fun. I ran mine without the EGT probe installed for 6 months. In fact for the first week the Attitude monitor just sat draped over the steering column. :eek:

I finally finished installation of the Edge Juice w/attitude.
Just came back from a 200 mile drive and wow.
Edge made me a believer.
I was kind of scared to drill the manifold but as soon as I started drilling the fear dissapeard.

Now... Next question is....

what do I need to do to my truck in order to use Level #4 and 5 more often.

Tranny !!!!!

What needs to be done with the tranny?
Who can do it and how much will it cost ?

Upgrade....cost???? Varies on the amount of upgrading.


LATER!

ace21
get a hold of mikeL he can do it for you real nice guy to deal with

he's a Dealer for TTS, Suncoast, ATS, Allison Trans Cooler. 310 674 4400 he's in inglwood so not far from you

I think 4 is ok if you have an exhaust upgrade to 4" and Level 5 is where you need to start thinking tranny although you should be ok with stock trans if you are not doing violent launches. Hot Juice Level 5 is where a tranny starts becoming a necessity.

Ace,

Make an appointment with Mike L. and all your tranny worries will be in the past. :D

cool I'll contact Mike L. and see what he can do for me.

thanks everyone.

Any tranny shops in Sacramento?

I just got the Juice on Friday and installed it on Sat. it doesn't seem to be working. I tried to set the power levels manually without the Attitude installed, and it doesn't respond to the "Confirmation of Rev's to Power Lever". I don't think I could have done the installation incorrectly, it's kinda of a no brainer to install. Any idea's or suggestions from anyone?

I just got the Juice on Friday and installed it on Sat. it doesn't seem to be working. I tried to set the power levels manually without the Attitude installed, and it doesn't respond to the "Confirmation of Rev's to Power Lever". I don't think I could have done the installation incorrectly, it's kinda of a no brainer to install. Any idea's or suggestions from anyone?

Do you have an older Edge without the Attitude? I know when the cummins got the Edge, they didn't have the attitude. My buddy had his on three the whole time. I run my Edge on 5 all the time without any tranny upgrades. I have put 12,000 or so miles on this way. I do turn it down to 2 when I am pulling. I also have the exhaust and intake kits.

I have another buddy who has a 6.0 stroker and he just put the Edge on his. I can take him off the line until I shift into 4th gear and he passes by me and I can't catch up. Hmmmmm propane injection maybe? :D

I figured it out after talking with the distributor that I bought it from which was no help in solving the problem. He gave me the Juice for an LLY, but I told him I had an LB7 motor. He's sending me the correct unit on Tuesday. Thanks anyway Mcmmikem for responding. Now as soon as I get it I'll be able to post how impressed I am with the Juice.