The Funk
05-23-2011, 02:35 PM
Almost made it into the 6s over the weekend. It went a 7.16@94mph and cut a 1.49 60ft
|
semperfidoordie 05-23-2011, 02:56 PM Congrats!! Gotta make it to a quarter mile and see how much faster she is now :D Should be low 11's I think DrHolliday 05-23-2011, 03:16 PM That has 10's written all over it, congrats! Stock motor or is it built? The Funk 05-23-2011, 03:27 PM That has 10's written all over it, congrats! Stock motor or is it built? Stock motor stock single cp3. I was spraying though paint94979 05-24-2011, 12:13 AM video? i would love to see this pass :D Osubeaver 05-24-2011, 12:33 AM Stock motor stock single cp3. I was spraying though Fast is fast, spray or no spray. Congrats! TheBac 05-24-2011, 06:57 AM Stock motor stock single cp3. I was spraying though That is crazy.....in a good way. :) X2 what Jerry said....congrats Funk! Now get to a 1/4 so you can get back on the Top50 list. Slick 05-24-2011, 08:38 AM video? i would love to see this pass :D Ryan told me there were a few videos taken during the day. It was a local car site's event. Hopefully they can be tracked down, because I'd like to see them as well.(didn't get to make it down there) The truck rocks the hell out, that's for sure. The Funk 05-24-2011, 09:55 AM If I can't get ahold of the video I did have the gopro on it. It did go a 7.30 on fuel only. Stingpuller 05-24-2011, 06:59 PM Congrat's that is smokin!! Awesome 60' time. You have that truck dialed in on the front half of the track. Jeff The Funk 05-25-2011, 08:42 AM video? i would love to see this pass :D Just my luck he didn't got the 7.16 pass but he did get the first nitrous pass. http://www.youtube.com/user/ooriceater#p/a/u/1/chPpRO0Ltro Kappa9012 06-01-2011, 03:25 PM damn nice pass, truck just sounds mean as hell... Turbo6600-HD 06-02-2011, 05:07 PM Thats crazy on a stock motor...makes me not so nervous about pushing mine that hard. How is the driveability with that big turbo as a single? The Funk 06-07-2011, 12:37 PM Thats crazy on a stock motor...makes me not so nervous about pushing mine that hard. How is the driveability with that big turbo as a single? To me the driveability is great u just don't want to put much of a trailer behind it! This is the 3rd year at this power level and it seams to be fine no telling how many passes I have made on it. jpowel29 06-15-2011, 11:04 PM Almost made it into the 6s over the weekend. It went a 7.16@94mph and cut a 1.49 60ft Congrats Ryan - you have consistantly worked that 60' time down. Impressive. joelykool 06-15-2011, 11:58 PM Wow! This is just plain awesome! Congrats man! OTHRGRL 06-16-2011, 09:58 AM Congrats on the passes and the awesome 60' times. To me the driveability is great u just don't want to put much of a trailer behind it! This is the 3rd year at this power level and it seams to be fine no telling how many passes I have made on it. What turbine wheel and housing do you have? Have you put a trailer behind it? We tow on S475s quite often, usually another Duramax, a few sets of tires, and a bunch of tools - with an 83mm turbine wheel and .90 or 1.0 housing they do just fine. You can hit small inclines at 1600-1700 RPM and by the time the EGTs come close to 1000* the turbo spools up and cools them right off. On the steeper climbs you need to be 1800-2000 RPM to keep the EGTs in check. I've towed another Duramax with an S480 with an 87mm turbine on mine and you have to keep the RPM up around 1800-1900 to keep EGTs in check on the inclines and 2000+ RPM on the steeper climbs. Those figures are all on the cast compressor wheels, with billet and BatMo wheels they spool up much better. | ||