|
: what’s the name for this option? inte 01-23-2004, 02:45 AM I saw it in someone's vehicle description ... ...the option that allows you to have a 2500HD 4x4 without any "4x4" logos on it. trite question from a (hopefully) soon-to-be 2500HD owner... Voodoo 01-23-2004, 05:34 AM inte, The RPO code is 9R1 Decal delete, Pickup bed (MSRP = No Charge) Deletes the "4x4" decal from the side of the Pickup bed on 4x4 Pickup trucks. jbplock 01-23-2004, 05:49 AM I bought my truck off the lot and it had the 4X4 sticker - used a heat gun to warm it up and it peeled right off - it appears to be made of vinyl.http://www.dieselplace.com/forum/smileys/Geek.gif Edited by: jbplock silatman 01-23-2004, 06:59 AM My truck is at least 6 month old. What are the chances I can get these babies off without finding paint fade to be an issue. Truck is that awesome Slate Gray. inte 01-23-2004, 10:41 AM The RPO code is 9R1 Decal delete, Pickup bed (MSRP = No Charge) Deletes the "4x4" decal from the side of the Pickup bed on 4x4 Pickup trucks. Thanks! I assume this removes the logo from the tailgate also, or would that be a separate code? Voodoo 01-23-2004, 10:57 AM inte, That is 9M4 Decal delete, tailgate (MSRP = No Charge) Deletes the nameplate or decal on the Pickup bed tailgate. It is not availble on LS or LT models, only on Base and Work truck models. chevmeister 01-23-2004, 07:58 PM My truck is at least 6 month old. What are the chances I can get these babies off without finding paint fade to be an issue. Truck is that awesome Slate Gray. I cooked mine after 15 months no fading. Pewter truck. use heat and peel by hand. They came right off. Used a littel goo-b-gone and it was perfectaly clean. if your not gonna put anything back wax the area with whatever you use on your truck. BlueOx03 01-24-2004, 03:19 PM My truck was about 6 months old when I pulled them off. I had the heat gun ready, but it was a warm day and they can off without it. Fade isn't as big of factor with todays paints. | ||