Where are you mounting your pyro's? I got my mini maxx/flo pro kit in today and was wondering. I have heard horror stories of pre turbo mount so I was thinking post turbo. I'm kinda new at this so all opinions are appreciated. Thanks

The passenger side Exhaust Manifold.. If you look toward the rear of the engine you'll see a flat spot that most put it there.

what about metal particles from the drilling/tapping process winding up in the turbo?

Drill and tap with the engine running. Make sure you wear safety glasses.

Just let the truck idle while while you drill it and tap it. Just ease the bit in and the tap and all those shavings will blow out. Don't use grease.