|
jackoue 04-06-2011, 09:51 PM Will either the CTS or CT read injector balance rates? I know they clear codes etc. I was thinking of linking one of these with a Duramaxtuner ECM Thanks again Tanc Crusher 04-06-2011, 10:06 PM Yes it shows injector balance rates. If you are referring to having the Insight changing an EFILive DSP5 tune position from the Insight be sure to let Nick know. There is a setting to either make the change from a hard wire switch or through a serial data connection which is what it will need to be set to. Brian CRASHNBURN 04-06-2011, 10:15 PM Will either the CTS or CT read injector balance rates? I know they clear codes etc. I was thinking of linking one of these with a Duramaxtuner ECM Thanks again Yeap, they will do that. Nick will set you up right! jackoue 04-07-2011, 10:56 AM thanks for the help guys.....so many decisions...lol blkdmax05 04-11-2011, 10:11 AM You'll be happy with that setup, that's the same thing I'm after right now. Good luck with your install BK Tool 04-11-2011, 10:22 AM As per my sig! Loving it! Much better than the old system I took off!;) mreeves23 04-19-2011, 11:38 AM Edge Insight CS/CTS for gauges with EFILIve from Nick for tuning is a great combination especially on the 01-05 Duramaxs cause you can use the Insight as your DSP switch! jackoue 04-19-2011, 10:54 PM cant wait to get it....ordered it last week GMC_DMAX_07 04-19-2011, 11:07 PM So can you not use the CS or CTS as gauges and to work as your selector switch on the LBZ's then? I was thinking a CS or CTS hooked to EFI live would be sweet, but maybe not if I cant do that. CRASHNBURN 04-19-2011, 11:12 PM So can you not use the CS or CTS as gauges and to work as your selector switch on the LBZ's then? I was thinking a CS or CTS hooked to EFI live would be sweet, but maybe not if I cant do that. Only the lb7 and the llys can be switched through the insight. Mauler90 04-25-2011, 05:42 PM So can you not use the CS or CTS as gauges and to work as your selector switch on the LBZ's then? I was thinking a CS or CTS hooked to EFI live would be sweet, but maybe not if I cant do that. Only the lb7 and the llys can be switched through the insight. Does anyone know if Edge is working on the LBZ option for this or is not going to be possible? CRASHNBURN 04-25-2011, 06:52 PM Does anyone know if Edge is working on the LBZ option for this or is not going to be possible? I can tell you it is not an edge thing. If EFI figures it out, then edge will be switchable. Talk to EFI. Last I heard they were not going to. Tanc Crusher 04-25-2011, 06:55 PM EFILive put a lot of work into it but never was able to figure out a way to do it on the Bosch ECMs. Brian Mauler90 04-25-2011, 08:52 PM EFILive put a lot of work into it but never was able to figure out a way to do it on the Bosch ECMs. Brian That's what I was afraid of. paoutdoorsman 09-27-2011, 12:33 AM Yes it shows injector balance rates. If you are referring to having the Insight changing an EFILive DSP5 tune position from the Insight be sure to let Nick know. There is a setting to either make the change from a hard wire switch or through a serial data connection which is what it will need to be set to. Brian Where are you guys finding the PID for injector balance rates on the Insight CTS. I went through my list twice the other day and didn't see anything that I thought could it. chatcr250 09-27-2011, 09:49 AM Its not a PID, you will need to go into the main menu and select diagnostics. The injector balance rates option should be there. mtl_dmax 09-30-2011, 05:35 PM Its not a PID, you will need to go into the main menu and select diagnostics. The injector balance rates option should be there. X2 See page 25 of the manual: http://www.edgeproducts.com/product_images/product_variation-user_manual-347.pdf | ||