WI Huck
08-08-2005, 10:44 PM
Lux amp wiring clarification and guidance please.
I have a guide for swapping the wires on the 24 pin connector and the 8 pin connector, but I have a few questions. First, I assume that these are the connectors that plug into the amp itself. Second, the directions I have say move A5 to A4 and so on. How do I get the pins out to move them? If they don’t come out, then what is the part number or where do I get pins to use in the spots that are empty and need a wire (like A4)? Third, the directions I have says add a microphone wire to B1 for the sound compensated volume. I have a harness that came with the amp I got and it has what looks like a microphone, but it has two wires. Where does the second wire go?
That brings up another question. Sorry but hey I am nervous! The second harness has a 24 pin connector with a wire in each spot except for A11 and A12 plus B11 and B12. I could use that plug instead of moving wires around if I have to by cutting everything apart and soldering the wirers into the right order.
The 24 pin connector now has A1, A2, A3, and A4 empty. The directions I have say do nothing with A1 and A2 which means they are not used right? Which spots are not used on both the 24 and 8 pin connectors?
Thanks for the help. It looks like the soldering gun and wire cutters come out tomorrow night.
Mark
I have a guide for swapping the wires on the 24 pin connector and the 8 pin connector, but I have a few questions. First, I assume that these are the connectors that plug into the amp itself. Second, the directions I have say move A5 to A4 and so on. How do I get the pins out to move them? If they don’t come out, then what is the part number or where do I get pins to use in the spots that are empty and need a wire (like A4)? Third, the directions I have says add a microphone wire to B1 for the sound compensated volume. I have a harness that came with the amp I got and it has what looks like a microphone, but it has two wires. Where does the second wire go?
That brings up another question. Sorry but hey I am nervous! The second harness has a 24 pin connector with a wire in each spot except for A11 and A12 plus B11 and B12. I could use that plug instead of moving wires around if I have to by cutting everything apart and soldering the wirers into the right order.
The 24 pin connector now has A1, A2, A3, and A4 empty. The directions I have say do nothing with A1 and A2 which means they are not used right? Which spots are not used on both the 24 and 8 pin connectors?
Thanks for the help. It looks like the soldering gun and wire cutters come out tomorrow night.
Mark