|
: Need 5" or 5" to 6" exhaust tip 12" or longer..... HD-Nate 08-08-2005, 11:00 AM I know I have seen them several times on line but when I'm ready to get one, I cant find the darn things. Anyone know of a dealer who carry these? Stainless of course!:thankyou2 nassdmax 08-08-2005, 01:21 PM HOG has some nice stuff... I got my complete system through www.dieselpro.net, but they may be able to get just the tip. I have a 4" system from them and it was a good deal for all 304SS stuff. I was quite happy with the quality. HOG tips are at http://www.hogperformance.com/p_products.asp?cid=9 You may want to call HOG direct since you are looking for a 5" to something. If they don't have anything, have you thought about your local big rig shops? Usually they have large diameter pipes that you may be able to make some type of tip out of. Good luck... HD-Nate 08-08-2005, 03:30 PM HOG has some nice stuff... I got my complete system through www.dieselpro.net (http://www.dieselpro.net), .. Thanks, I looked around but didnt see what I was looking for. Anyone else? Mark Craig 08-08-2005, 05:11 PM HD-Nate, We have a 4 to 6 inch rolled edge and angled in 304 stainless with a built in clamp overall length is 18 inches. It's not on our site yet but looks like the 4 to 5's just bigger! Mark @ DPPI HD-Nate 08-08-2005, 05:24 PM HD-Nate, We have a 4 to 6 inch rolled edge and angled in 304 stainless with a built in clamp overall length is 18 inches. It's not on our site yet but looks like the 4 to 5's just bigger! Mark @ DPPI I'm looking for a 5" TO 6" OR even a 5" that will slide over a 5" pipe. stangs400 08-14-2005, 02:09 PM ITP diesel has exactly what your looking for. you just have to go under as ford or dodge and look at there exhaust tips... ITPdiesel.com really cheap too!:grd: Buzz38 08-14-2005, 02:26 PM Sounds like exhaust envy to me... ):h ):h Who will be the first to market with a 7" turbo back system. hehe... HD-Nate 08-15-2005, 11:33 AM ITP diesel has exactly what your looking for. you just have to go under as ford or dodge and look at there exhaust tips... ITPdiesel.com really cheap too!:grd: :exactly: Thats it, Thank you very much! BlueOx03 08-15-2005, 02:05 PM I got the 6" tips I used to have on my truck from ITP, Dennis is an awsome guy to deal with..... Kennedy 08-15-2005, 02:06 PM I now have access to the same tip in 5" that we use on the 4" systems. | ||