Just got my predator and tried to install a tune. Got through the disclaimers and entered manual transmission, Then while it was communicating, said "script error". Diablo is closed and I'm leaving for Ohio tomorrow, so I figured the Professionals here could help me out.

Ruke

did you pull the fuses that it mentions in the supplement manual?

That can cause grief

Yes, Don't have onstar or any other goodies, went by the book. The fella that I bought it off of tried to help and said that he has never heard of that before. He ever called some other people and they were dumbfounded as well.

Also make **SURE** you have the ignition key is on when it is supposed to be on...This has happen to more people than will admit...

Mike

Okay, I will try that!

looks like that fixed it, Thank you. Maybe somebody will be able to use this for future brain farts! Thank heaven for wireless internet.

LOL!! glad that was an easy fix!!

a little late here but
you dont have to pull any fuse's
if it ever has that problem again
just hook it up like your trying to jump start it from another car
leave the other vehicle running
while you reprogram

they are just a little voltage sensitive

general rule that never gets me into trouble
never program after any accessories have been on while the truck is off.

cause if it hasent happend to you yet, if the programmer stops at the wrong point in the programming process your truck will not start

Yes, Don't have onstar or any other goodies, went by the book. The fella that I bought it off of tried to help and said that he has never heard of that before. He ever called some other people and they were dumbfounded as well.

happened to me.... lol

One thing that I suggest is that you do this on a fully warmed up engine. It has nothing to do with temps, only that the engine has been run and the batteries should be topped off and no preheating devices should attempt to run.