cruznis300
08-02-2005, 11:54 AM
Ok so where do I find it??
|
sierra8.1 08-02-2005, 01:02 PM It should be on the build sheet in the glove box lid!!):h sierra8.1 08-02-2005, 01:08 PM It should be on the inside of the glove box door, not sure which one is the paint code though,maybe some one else could narrow that down. Larry partsguy662 08-02-2005, 01:51 PM In the glove box is the RPO code list (a white sticker with a pile of letters and numbers) at any rate, after the list of codes you'll see a line that says BC/CC...after that, on the same line is your paint code.... I'll take a pic of one tonight so I can show this.... cruznis300 08-02-2005, 06:21 PM So my paint code says the following" BC/CC U 722J 690 So which would it be? partsguy662 08-02-2005, 06:51 PM U722J is your paint code.. If you were to ask to get some mixed at a paint supply, you would tell them that your paint code is WA722J Hope this helps :) Scott cruznis300 08-02-2005, 07:57 PM U722J is your paint code.. If you were to ask to get some mixed at a paint supply, you would tell them that your paint code is WA722J Hope this helps :) Scott It's for the Line-X shop for my bedliner.. Thanks for the help JBoyer 08-02-2005, 10:03 PM I have the same truck, color, etc. I was talking to the Line-X dealer today about spraying the bedliner in the original color. Please tell me what you think when you get it done. I have not really decided yet. cruznis300 08-03-2005, 11:10 AM I have the same truck, color, etc. I was talking to the Line-X dealer today about spraying the bedliner in the original color. Please tell me what you think when you get it done. I have not really decided yet. I will take pictures once I get it done. I've been going back and forth with "truckdaddy" who is a line-x dealer out west (I'm in New Hampshire). He had called the dealer in my area to discuss his process and ensure it's done the same way. I've also been talking with the dealer here who is very knowledgable and has taken a lot of time to discuss the process and results with me. I'll get back to you after the 17th and post pics. partsguy662 08-03-2005, 11:30 AM crusnis - if that code doesn't do it for them and they need a mix # I can get that for you too....that should be all they need though.. | ||