number9
07-31-2005, 02:23 AM
I am going to install backup lights on my 2002 2500HD 6.0 gasser. I have searched and read posts for 3 days on this forum and the Avalanche forum getting info. Very hard to keep track due to different model years and install methods, however I think I have it and just would like someone who has done this - or is knowledgable in this area - to confirm my plan of attack.
I want to use the Aux Lamps switch to power the lights manually, when I want to use them. I do not plan to have them come on when truck is in reverse - only when I push the button.
Here is my plan....
Parts Needed
GM #15040484 4-switch Pod
GM #15734687 Blanks for switch pod (5 pk)
GM #15722980 Aux Lamps switch (Left)
GM #15305931 Harness for Aux Lamps switch (6 leads)
GM #12193922 - Connector for Position C9 on the MBEC
GM #12129424 - Terminals for MBEC connectors (x3)
30A Relay
Backup Lights
Aux Lamps pinout
Aux Lamps Switch ..MBEC other
A - Not Use
B Ground .C9
C - Power In {any 12v source} ..tap into switched power under dash from ???????
D - LED Dimming Signal ..C9
E - I/P Dimming Supply Bus .C9
F - Power Out {to lights or replay} .30a Relay
(note can wire D and E together and run to Fog/Cargo switch E if need to)
I have modified a diagram I found to fit my setup - I think it represents what I need / want - PLEASE let me know if it does not.
Also, I have heard/read the C9 MBEC connector and terminals are hard to come by - anyone have any ideas where I could get these?
I want to use the Aux Lamps switch to power the lights manually, when I want to use them. I do not plan to have them come on when truck is in reverse - only when I push the button.
Here is my plan....
Parts Needed
GM #15040484 4-switch Pod
GM #15734687 Blanks for switch pod (5 pk)
GM #15722980 Aux Lamps switch (Left)
GM #15305931 Harness for Aux Lamps switch (6 leads)
GM #12193922 - Connector for Position C9 on the MBEC
GM #12129424 - Terminals for MBEC connectors (x3)
30A Relay
Backup Lights
Aux Lamps pinout
Aux Lamps Switch ..MBEC other
A - Not Use
B Ground .C9
C - Power In {any 12v source} ..tap into switched power under dash from ???????
D - LED Dimming Signal ..C9
E - I/P Dimming Supply Bus .C9
F - Power Out {to lights or replay} .30a Relay
(note can wire D and E together and run to Fog/Cargo switch E if need to)
I have modified a diagram I found to fit my setup - I think it represents what I need / want - PLEASE let me know if it does not.
Also, I have heard/read the C9 MBEC connector and terminals are hard to come by - anyone have any ideas where I could get these?